Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Coney Island
If your chimney crown is crumbling, your mortar joints are washing out, or water is showing up at the firebox after a nor’easter, you’re in the right place. Chimney repair in Coney Island is different from repair a few miles inland. Here masonry takes a constant salt spray off the Atlantic, wind-driven rain hits the seaward face harder, and many attached brick buildings share a single chimney stack between several flues. We work with a curated roster of professional-grade parts – DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, Copperfield – and our technicians have up to 15 years of experience reading exactly this kind of damage. Call (855) 342-5978 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Why Coney Island Homeowners Call Chimney Sweep Gravesend for Chimney Repair
We’re a chimney-and-fireplace specialist, not a general handyman outfit, and that focus shows up in how we diagnose a stack in Coney Island. Dense, attached housing means a repair on one building often involves a shared stack, a party wall, or flashing that’s tough to reach, and we go in expecting that. We walk the whole crown on every inspection – not just the street side that still looks intact – because salt corrosion on the ocean-facing face is where the real failure usually sits.
The brands we install are the reason repeat customers keep calling. HeatShield resurfacing restores a damaged clay flue liner from the inside instead of leaving it to fail further, and it’s a repair-grade solution most sweep-only companies don’t offer. We name the brands we install because materials matter as much as labor. Ask us what we’d use on your chimney and we’ll tell you plainly, along with what can safely wait.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Coney Island
Mortar Repointing
Salt air eats the mortar joints in Coney Island’s 1920s to 1950s brick apartment houses faster than any sheltered part of Brooklyn. Repointing means grinding out the failed mortar and packing in fresh material that matches the original brick, so the joints hold instead of washing out again. We scope the work across the whole stack, including the seaward side.
Spalling Brick Repair
Spalling is what happens when moisture gets behind the brick face and freezes or pushes the surface off. On ocean-facing walls in Coney Island, salt spray accelerates that cycle, so you’ll see flaking brick faces and loose chunks near the crown first. We replace the failed units and treat the surrounding masonry so the damage doesn’t creep.
Chimney Waterproofing
A breathable waterproofing treatment on the masonry keeps nor’easter rain out while still letting moisture inside the brick escape. In Coney Island that matters most on the side facing the water, where wind-driven rain finds every hairline crack. Waterproofing after a repair is what stops the same joints from failing next season.
Flashing Repair
Flashing is the metal that seals the chimney to the roof, and on tight Coney Island streets it’s often the step that gets skipped because it’s hard to see. When flashing pulls away, water runs straight down into the attic or the ceiling below. We reset or replace it, paying close attention to the party wall on attached buildings.
We also handle chimney rebuilding and tuckpointing, so whether you need a section rebuilt or old mortar matched and repointed, it all stays with one specialist. For the full scope, see our Chimney Repair services.
The Coney Island Chimney Problem You Don’t See From the Street
Coney Island’s direct Atlantic exposure means chimney crowns and mortar caps fail first on the ocean-facing side of a building. Turn onto almost any block and you can see a stack that looks sound from the street: straight joints, tidy brick, nothing alarming. Walk around to the seaward face and the story changes. The mortar there is salted through and crumbling, the crown has lost its slope, and the flashing has lifted. It’s the single most common thing we see, and it’s why a repair that looks complete from the sidewalk can fail again within a season. An inspection has to walk the whole crown, not just the visible side, or the job gets scoped too narrowly and the water finds the same path back in.
In Coney Island’s attached brick apartment houses and converted rooming houses, a single stack often serves several flues. When a neighbour’s appliance vents into that shared stack, exhaust and moisture work on the mortar and clay flue tiles from the inside while salt spray and wind-driven rain attack the crown and flashing from the outside. A qualified local pro typically runs a Level 1 or Level 2 inspection first to map which flues share the stack, then repoints the crumbling joints, rebuilds or reseals the crown on the ocean-facing side, and repairs flashing where it has pulled away – waterproofing the masonry afterward so the next nor’easter doesn’t soak straight back in.

Trusted Brands We Service in Coney Island
We install and work with professional-grade lines: DuraFlex for stainless liners, HeatShield for ceramic liner resurfacing, Copperfield and Gelco for caps and components. These are materials used by certified chimney institutes, not big-box substitutes, and they’re what we put into Coney Island stacks every week. We don’t stock parts on a truck; when a repair needs a specific cap or liner section, we order it and book the install, so the part is right for the job instead of close enough.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Coney Island Homes
- Salt-corroded crowns missed from the street. The ocean-facing mortar cap crumbles while the street side still looks intact, so repointing gets scoped too narrowly and fails again within a season.
- Cross-contamination in a shared stack. A neighbour’s appliance vents into the same chimney, pushing moisture and exhaust against clay flue tiles that were never lined, so interior spalling goes undiagnosed until the firebox or damper shows staining.
- Bungalow chimneys left idle for months. In the West End and Sea Gate, summer-only chimneys sit unused, birds and humid air collect in the flue, and cracked crowns or pulled flashing go unnoticed until the draft fails in fall.
- Flashing skipped on tight roofs. Ladders go up between attached buildings where the flashing at the party wall is hard to see, and it’s the first thing a rushed job leaves out.
Pricing for Chimney Repair in Coney Island, NY
Chimney repair here is priced per job from a written estimate, and we give you that estimate free. Typical ranges for Coney Island work: mortar repointing usually runs $600-$1,800 depending on how much of the stack is affected, spalling brick repair $400-$1,500, chimney waterproofing $350-$800, and flashing repair $300-$900. A crown rebuild pushes higher, and a full chimney rebuild sits well above that because it’s structural work. Ocean-side damage often means more square footage than a street-side quote would suggest, which is exactly why we walk the whole crown before pricing. The written estimate sets the final price.
We Also Serve Cities Near Coney Island
The same salt-air issues follow the shoreline into Brighton Beach and Sheepshead Bay, and we cover Gravesend, Bensonhurst and the surrounding blocks as well. If you’re on the water side of any of them, the inspection logic is identical: walk the full crown, map the shared flues, and price the repair from what’s actually failing. We serve Coney Island and these nearby neighborhoods with the same specialist scope.
Serving Coney Island, NY – Our Local Coverage Area
We serve Coney Island and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Coney Island
Yes. A shared stack means your flue is exposed to the neighbour’s exhaust and moisture whether or not you use your fireplace, and unlined clay tiles can spall from the inside out. We run a Level 1 or Level 2 inspection to map which flues share the stack, then recommend repair only where the camera and photo evidence show it’s needed. Call (855) 342-5978 for a free estimate.
Because salt spray and wind-driven rain hit the seaward face hardest, and that’s the side you never see from the sidewalk. The street-facing joints can stay intact for years while the ocean-facing mortar is already salted through and failing. An inspection that only checks the visible side will miss it, so we walk the whole crown. Call (855) 342-5978 to book a full inspection.
Start with the crown and flashing, then the flue. An idle flue collects birds, humid summer air and debris, and a cracked crown or pulled flashing above it goes unnoticed until the draft fails in fall. We check the cap and crown for corrosion, look for water staining, and camera the flue before recommending anything. Call (855) 342-5978 for a free estimate.
It needs rebuilding or resealing, not just paint. A crown that’s lost its slope lets water pool and soak into the masonry below, and on the ocean side salt corrosion makes that worse. Small cracks can sometimes be sealed; a crown that’s crumbling or flat needs to come off and be rebuilt. We’ll show you the photo evidence and tell you plainly what can safely wait. Call (855) 342-5978 for a free estimate.
They check the full flashing perimeter, especially at the party wall on an attached building, plus the condition of the shingles and counter-flashing around it. On tight Coney Island streets that joint is hard to see from a ladder, so it’s where water gets in unnoticed. We reset or replace the flashing and reseal the joint so the next storm stays outside. Call (855) 342-5978 for a free estimate.
If you’re in Coney Island and your chimney needs a repair, start with a free written estimate. We’ll walk the full crown, inspect the shared stack if you have one, and show you what we find before anything is recommended. Call (855) 342-5978. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Gravesend.