Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Kensington
If you own a rowhouse off Church Avenue or a semi-detached Victorian near Ocean Parkway, you already know the chimney on your roof isn’t really yours alone. Kensington was built tight, and most of its original masonry stacks rise straight through the party wall between attached homes. That changes how chimney repair works here. We’re Chimney Sweep Gravesend, and we handle repair across Kensington with the assumption that any single stack usually means two flues, two owners, and one shared structure. Our technicians have up to 15 years of experience, our estimates are free, and the price is set per job by the written estimate before we begin. Call (855) 342-5978 to book a look at your chimney.

Why Kensington Homeowners Call Chimney Sweep Gravesend for Chimney Repair
Kensington is a chimney-and-fireplace town, but not in the way most people assume. The dominant housing stock here is early-20th-century brick rowhouses and two-to-three-family semi-detached homes, and the original masonry chimneys on those buildings were meant to vent coal, then oil, and now gas-fired boilers and water heaters. Very few still serve a wood fire. So when someone in Kensington calls us about “cleaning,” what they often need is a real inspection: a look at the crown, the clay liner, and the joints on a stack that’s been quietly venting combustion gases for a very long time.
That’s where our specialist focus helps. We’re not a general handyman adding chimneys to a long list. Chimney and fireplace systems are all we do, which means the person diagnosing your chimney has also repointed crowns, reset flashing, and resurfaced liners with HeatShield. The inspection isn’t a checkbox. It’s informed by hands-on repair experience. Our technicians have up to 15 years of experience on these systems, and we bring that to every Kensington call.
We also carry professional-grade parts from names you may already know if you’ve researched chimney work: DuraFlex, HeatShield, Copperfield, Olympia Chimney, Famco, and Gelco. We don’t stock parts on trucks or keep a warehouse, but we specify the right materials for the job and source them, which means you don’t end up with the big-box substitute. That matters on a Kensington rowhouse, where the parts need to fit the liner that’s actually there.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Kensington
Most of the repair work we do in Kensington falls into three buckets: keeping water out, keeping the masonry sound, and making sure the flue still drafts the way it should. Here’s how those break down on the shared stacks and exposed rooflines you find across the neighborhood.
Mortar Repointing
The mortar joints on a Kensington roofline chimney take the worst of the freeze-thaw cycle. Cold, wet winters push moisture into the joints, it freezes, expands, and pops the mortar loose. Repointing cuts out the failed joint and packs in fresh mortar matched to the original. On a shared party-wall stack, we often have to coordinate access with the adjoining owner so we can reach both faces from the roof.
Spalling Brick Repair
Spalling is when the face of a brick flakes off, usually because moisture got behind it and froze. On Densmore or East 3rd Street rowhouses, spalling tends to show up on the exposed upper courses of the chimney where the roofline catches wind and rain. Left alone, a single spalled brick becomes a dozen, and the repair grows from a patch into a rebuild. We replace the damaged brick and address what let the water in.
Chimney Waterproofing
A breathable masonry water repellent keeps rain out of brick and mortar without trapping moisture inside. It’s one of the most cost-effective things you can do on a Kensington chimney, and it’s the step most often skipped. We apply it after any repointing or brick repair so you’re not sealing over a wet wall. Because the stack is exposed, winter weather is what drives the need.
Flashing Repair
Flashing is the metal where the chimney meets the roof, and it’s the most common source of leaks that get blamed on the chimney itself. On Kensington rowhouses, a failed flashing joint can send water down into the neighbor’s ceiling through the shared stack. We reset or replace flashing so it laps correctly against the masonry and the roof, then verify the seal from the roof.
Trusted Brands We Service in Kensington
We install and work with a curated set of professional-grade chimney products: DuraFlex flexible liners, HeatShield ceramic resurfacing, Copperfield components, Olympia Chimney and Famco parts, and Gelco. These are names the chimney trade recognizes, not substitutes pulled off a hardware shelf. HeatShield in particular lets us resurface a deteriorated clay liner with a ceramic system instead of defaulting to a full reline, which is often the right call on a Kensington rowhouse where the flue serves only a boiler. We don’t claim to stock these parts locally, but we specify them accurately and get the job moving.

Common Chimney Repair Problems We See in Kensington Homes
- A cracked crown on a shared stack. When the mortar crown at the top of the chimney spalls or cracks, water runs straight down the flue. In a Kensington party-wall stack, that water can end up in the neighbor’s basement, rusting their damper and softening their mortar joints too. The fix is repointing the crown, but the access usually means talking to both owners.
- Spalling brick on the exposed roofline. The upper courses of a Kensington chimney face the weather with nothing to shelter them. Repairs get delayed because roof access has to be arranged with the adjoining owner, and by the time it happens the damage has spread into a rebuild.
- Missing or loose caps on gas-venting flues. A cap that’s blown loose or never installed lets rain and animals straight into the shared liner. On a boiler flue that already has clay-tile cracks, that accelerates the deterioration and can throw off draft.
- Deteriorated mortar joints at the roofline. Freeze-thaw winters open the joints on the exposed chimney, and an open joint is an open door for water. Repointing early keeps a masonry repair from turning into a full rebuild.
Pricing for Chimney Repair in Kensington, NY
We give you a range so you can plan, then a written estimate that sets the final price. Typical chimney repair in Kensington runs from $250 to $650 for repointing a crown or localized mortar work, $400 to $1,200 for spalling brick repair depending on how much brick is involved, $300 to $800 for chimney waterproofing, and $350 to $1,000 for flashing repair where the leak has reached the roof. A partial rebuild of a badly deteriorated stack is a larger job and priced separately after inspection. What moves the number up or down is access, the condition of the shared stack, and whether we find liner damage on the sweep. We inspect with a camera and share the photos before recommending anything. Estimates are free, so call (855) 342-5978 for a look at yours.
See the difference
Before
After
Before
After
Before
AfterWe Also Serve Cities Near Kensington
We work across Kensington and the surrounding neighborhoods, including Flatbush, Borough Park, Midwood, and Sunset Park. The housing stock on these blocks is much the same: brick rowhouses, shared party-wall stacks, and original clay liners venting gas appliances. If you’re nearby and want the same repair-first approach, our chimney repair team can take a look.
Serving Kensington, NY – Our Local Coverage Area
We serve Kensington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Kensington
Not necessarily both at once, but access to both sides is often needed. On a shared party-wall stack, we may need to look at the flue from each basement and reach the roof through either unit, so we coordinate a time that works for both owners. If only one side is accessible, we can still assess the visible damage, but the repair plan may need to wait for the second access. Call (855) 342-5978 to set up the inspection and we’ll help you work out access.
Freeze-thaw winters on an exposed crown are the usual cause, and the tell-tale sign it’s reaching your neighbor is a damp smell or rust in their basement near the shared flue. Water gets into a cracked crown, runs down the liner, and can cross into the adjoining flue. Repointing the crown and checking the cap usually stops it. If you’re seeing any of those signs, call (855) 342-5978 for an inspection.
You’ll want a camera inspection that looks at the full length of the liner, because a gas-venting clay flue is where cracks and gaps quietly develop. We run a camera down, photograph what we find, and share the images with you before recommending anything. That’s how you can see for yourself whether the liner is sound or whether it needs a HeatShield resurfacing. Call (855) 342-5978 to book a camera inspection.
Yes. A missing or loose cap lets rain and animals into the shared liner, and on a party-wall stack that water can reach the adjoining flue and accelerate liner cracks and draft problems. The cap is a cheap fix that protects both sides. If you’ve noticed a missing cap, call (855) 342-5978 and we can replace it.
Once a year is the usual recommendation for a boiler flue, and Kensington’s cold, wet winters and humid summers make that a reasonable rhythm here. The inspection catches a cracked crown, a loose cap, or liner damage early, before water crosses into the shared stack. We don’t recommend work without camera evidence you can see. Call (855) 342-5978 for a free estimate.
What a Kensington Chimney Repair Usually Involves
On a typical Kensington block, a homeowner calls about a damp smell near the boiler and a pro finds that the chimney crown on the shared stack has cracked and spalled, letting water run down the flue liner that serves both the boiler and the neighbor’s water heater. The fix usually means repointing the mortar crown, replacing the cap, and sometimes installing a new liner section so the shared stack stays dry and drafts correctly. Because the stack rises through the party wall, the technician often has to schedule access with both property owners to finish the work from the roof and the basement. That’s the part that makes Kensington repairs different from a solo-house job in a nearby suburb.
Book Your Kensington Chimney Repair
If your chimney is on a shared Kensington stack, the sooner a crack or cap problem is caught, the less it costs and the fewer neighbors it reaches. We inspect with a camera, share the photos, and give you a written estimate that sets the final price. Call (855) 342-5978. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and we’ll tell you plainly when work can safely wait.
Written by the team at Chimney Sweep Gravesend.