Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Mill Basin
If your Mill Basin home has more than one fireplace, or a fireplace plus a wood stove or an insert, you don’t have one chimney to keep up with. You have a set of them, and they all need eyes on them. That’s the work we do here. We’re a chimney-and-fireplace specialist, not a general handyman who adds a sweep to the list, and we know the housing stock along the bay: the brick-and-frame ranches and split-levels, the short and offset flue runs, the fireplaces that went in after the house did. Call (855) 342-5978 and we’ll get you booked.

Why Mill Basin Homeowners Call Chimney Sweep Gravesend for Chimney Sweep
Mill Basin is a different kind of chimney market than most of Brooklyn. The houses are detached, single-family, and built on filled marshland along Jamaica Bay. A lot of the fireplaces and wood-burning stoves weren’t original to the house. Owners added them, often decades ago, often with a local mason, and often with little or no paperwork that survived. That single fact shapes most of the calls we get from Mill Basin.
We know what a chimney on a 1950s or 1970s split-level or ranch here tends to look like from the inside. Low roof pitches and later additions mean flue runs are frequently short, offset, or mounted on an exterior wall, and each one drafts and collects creosote differently. We bring that to the job rather than treating every flue like a full-height interior chimney. If you’re comparing us against a sweep-only service, the difference shows up when the inspection turns up something and you need a straight answer about what it means.
We install and service products from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. Materials matter as much as labor, and we name the brands we work with because a liner is not the place to save twenty dollars.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Sweep Services in Mill Basin
For a house with several appliances, the annual visit is really a small schedule of inspections and cleanings, not a single sweep. Here’s how we handle it in Mill Basin.
Level 1 Inspection
A Level 1 inspection covers the readily accessible parts of the system: the firebox, damper, smoke chamber, flue, and cap, checked from the ground and from inside the house. On an annually used fireplace in sound condition, this is usually enough. On a Mill Basin house with a fireplace plus a stove, we do a Level 1 for each appliance that’s been serviced and maintained on schedule, so every flue gets its own read.
Level 2 Inspection
A Level 2 inspection is what an added fireplace, a stove, or a newly purchased Mill Basin home generally calls for, and it includes a camera run through the flue. This is the inspection that finds what the brick on the outside won’t tell you. On houses where the fireplace was retrofitted with no documentation, a camera is how we confirm whether the flue is lined, clay-tile, or open behind the masonry. We document what we find so you can see it yourself.
Creosote Removal
Long heating seasons and coastal humidity are a bad pair for creosote. The buildup stages differently in short and offset flue runs, and glazed, third-degree creosote won’t come off with a standard brush. We sweep every flue on the property, not just the one with the visible firebox, and we tell you plainly what we found. If it’s the stubborn kind, we’ll explain what removing it takes.
Soot Removal
Soot is the fine, dry deposit that coats the smoke chamber and the shelf above the damper. It’s part of every cleaning, and on a house with two fireplaces and a stove, it accumulates in each one. We clean the firebox, smoke chamber, and damper area as part of the sweep so nothing gets left behind to draft back into the room.
Trusted Brands We Service in Mill Basin
When a flue here needs relining or repair, the materials matter. We work with DuraFlex stainless liners, HeatShield ceramic resurfacing for liner repair, Gelco, Olympia Chimney, Famco, and Copperfield. HeatShield is the industry’s leading ceramic resurfacing system, and it’s a repair-grade solution, not a temporary patch; most sweep-only outfits don’t offer it. We don’t claim to stock parts locally, but the brands we name are the ones we install, and we’ll tell you honestly whether a repair calls for a liner, a resurfacing, or nothing at all yet.

See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Mill Basin Homes
The failures here repeat, and they come from three things: how the fireplaces were put in, what the bay does to the masonry, and how the flues run.
- Fireplaces added after the house was built. Many Mill Basin fireplaces and stoves were installed by the original owner or a local mason with little documentation, so the flue behind the firebox is often unlined or clay-tile. From the street the brick looks fine, which is exactly why it goes unnoticed until an inspection.
- Short, offset, or exterior-mounted flue runs. Low roof pitches and later additions mean the flue rarely runs straight up through the middle of the house. Draft and creosote staging behave nothing like a full-height interior chimney, and a weak draw is often the first sign.
- Salt air and humidity rusting dampers and caps. The bayfront setting rusts dampers and caps and spalls masonry and crowns. A leaking cap or a failed crown lets moisture in, and you see the ceiling stain long before you see the problem from outside.
- Failing crowns that get missed. A cracked crown is easy to overlook on a low-slung postwar roof. Left alone, water works into the masonry and then into the house, which is why we check crowns on every visit and close the loop with cap and crown work.
Pricing for Chimney Sweep in Mill Basin, NY
Here’s what the work typically runs in Mill Basin, estimated and set in writing before we start. A standard single-flue sweep and Level 1 inspection usually runs $150 – $275. A Level 2 inspection with a camera, which is the right call for a retrofitted fireplace or a new-to-you home, typically runs $250 – $450. Creosote removal on a heavy or glazed flue, and fireplace cleaning on a house with several appliances, run on top of that depending on how many flues are involved. The written estimate is the final price, so you’re not guessing. If all your flues are in good shape and nothing needs doing yet, we’ll say so plainly.
We Also Serve Cities Near Mill Basin
Mill Basin isn’t the only place we work along this stretch of Jamaica Bay. We also cover Bergen Beach, Marine Park, Flatlands, and Sheepshead Bay. If you’re in one of the neighboring neighborhoods and want the same approach to a multi-flue house, we can help there too. Mill Basin sits close to all of them, and the housing stock and the moisture problems are much the same.
Serving Mill Basin, NY – Our Local Coverage Area
We serve Mill Basin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Sweep in Mill Basin
Yes. Each flue is a separate appliance and needs its own inspection, because each one drafts, collects creosote, and wears differently. On a house with three appliances, that’s three flue reads, not one. We schedule them together so you get a single report on the whole system. Call (855) 342-5978 to book a multi-flue inspection.
Wind-driven pressure and a flue that terminates short or on an exterior wall is usually the cause, and a smoky fire on nor’easter days is a draft problem, not a cleaning problem. Short, offset, or exterior-mounted flue runs here can’t overcome the pressure the way a tall interior chimney would. The fix depends on what the camera shows, so a Level 2 inspection is where to start. Call us to get it looked at.
Yes, because the brick you can see tells you almost nothing about the flue inside it. That’s the whole point of a camera inspection on these houses. Behind sound-looking brickwork on a 1950s – 70s split-level, we routinely find an unlined or clay-tile flue where the fireplace was added later. The only way to know is to look. Call for a Level 2 inspection and see the footage for yourself.
Third-degree creosote is glazed and hardened onto the flue and won’t come off with a standard brush, so no, brushing alone won’t clear it. It’s the stage that calls for chemical treatment or mechanical removal, and it’s the reason long heating seasons here need a real annual sweep. We’ll tell you what stage it’s at and what removal actually takes. Call (855) 342-5978 for an estimate.
It’s usually the bayfront environment doing exactly what you’d expect: salt air and high humidity rust dampers and caps and spall crowns and masonry. Nor’easters and coastal flood events add repeated moisture exposure on top of that, so exterior chimneys age faster than interior ones. A stiff damper and a cracked crown are both moisture working its way in. We repair crowns and install caps, and we can quote it in one visit. Call us to set it up.
Whether you’re booking a sweep for one fireplace or a full inspection of every flue on a Mill Basin property, we’ll tell you what we find and what it needs, and nothing more. One specialist for the full chimney: cleaning, inspection, repair, and weatherproofing. Call (855) 342-5978 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Gravesend.