Chimney Cap & Crown in Gravesend, NY | Chimney Sweep Gravesend

Chimney Cap & Crown in Gravesend - Measured On Site, One Written Price

Caps and crowns measured on your actual flue rather than fitted from a generic box, with one written price covering the part and the fitting.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Trusted Chimney Cap & Crown for Gravesend Homeowners

A missing or rusted-through cap is one of the quietest problems a chimney can have, and one of the most expensive to ignore. Rain runs straight down a bare flue, birds and squirrels nest in it, and the crown underneath slowly cracks with every freeze and thaw. Our technicians have up to 15 years of experience fitting caps and rebuilding crowns, and because we do chimney work and nothing else, the inspection that finds the problem is the same visit that fixes it. We work with trade-grade materials from names like Copperfield and Gelco, not hardware-store substitutes. If a cap is loose, bent or gone, call (855) 342-5978 and we’ll book you in for a same-day visit where the schedule allows.

Call (855) 342-5978

What Our Chimney Cap & Crown Service Includes

Caps and crowns are two different parts of the same weatherproofing job. The cap sits on top of the flue and keeps rain, animals and sparks out. The crown is the concrete or mortar slope at the very top of the masonry that sheds water away from the brick. One protects the flue, the other protects the chimney structure, and in Gravesend we usually find they fail together.

Cap Installation

A cap is a fitted cover over the flue opening, usually stainless steel or copper with a mesh screen around the sides. You need one on any chimney that doesn’t have a cap, or on a flue that was left open after a stove was removed. We measure the flue, choose a cap sized to the actual opening rather than a universal bracket, and secure it so wind can’t lift it off the masonry.

Cap Installation

Cap Replacement

Replacement makes sense when an existing cap is rusted through, dented, missing screen panels, or sitting loose on a flue it was never sized for. A failing cap lets water and animals in while the rusted mesh stops doing its job on sparks. We pull the old cap, check the flue tile edges underneath for chipping, and set a new one with the correct clearances.

Cap Replacement

Crown Repair

The crown is the sloped concrete cap at the top of the masonry, and cracks in it let water soak into the brick and the mortar joints below. You need crown repair when you can see cracking from the ground or when a chimney inspection finds the slope has flattened and stopped shedding. We rebuild or patch the crown to restore the slope and bond it back to the flue, using a mortar mix suited to the freeze-thaw swing New York gets.

Crown Repair

Crown Coating

Crown coating is a flexible, waterproof membrane applied over a crown that’s sound but showing hairline cracks. It’s the right call when the concrete is still intact and doesn’t need to come off. We clean the surface, fill the small defects, and coat the whole crown so water runs off instead of working into the seams.

Multi-Flue Cap

A multi-flue cap covers two or more flue openings on one chimney with a single unit, which is common on the wider chimneys you see on Gravesend’s older brick homes. You need one when separate single caps look cluttered, or when each flue has its own cap but the masonry between them is exposed. We build the unit to the full footprint of the chimney top so the whole crown area stays covered.

Custom Cap

Some chimneys have an unusual shape, an oversized flue, or a stone or stucco top that off-the-shelf caps won’t fit without looking bolted on. A custom cap is fabricated to the exact measurements of your chimney. We take the dimensions on site and have the cap made to match, in copper or stainless depending on the look you want and how the chimney is built.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (855) 342-5978

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Brands We Service for Chimney Cap & Crown

We work with a short list of chimney-product makers we trust, and we name them because materials matter as much as labor. Copperfield makes caps and related chimney components in copper and stainless, and we fit their products on a wide range of Gravesend homes where the finish has to hold up to years of wet winters. Gelco products come up often on cap and crown work too, and we know where those components tend to wear first so we can check them as part of the inspection rather than after they fail.

DuraFlex is a name we see a lot in liner systems, and a cap sits right on top of that liner, so we’re used to making the two work together without disturbing the flue. HeatShield is the ceramic resurfacing system we use when the liner beneath the cap needs restoration, and it changes what we recommend at the top of the chimney because the cap and crown have to protect a repaired flue properly. Whether you have Copperfield, Gelco or any other make, we can help.

Signs You Need Chimney Cap & Crown Right Now

  • Water in the firebox after rain. Damp firebrick, a rusty damper, or a puddle on the smoke shelf usually means the cap is missing, undersized, or rusted through. Water in the firebox also loosens creosote, which makes the chimney harder to sweep cleanly.
  • Cracks or crumbling concrete at the top. If you can spot a split in the crown from the ground with binoculars, water is already getting in. Left alone, the freeze-thaw cycle widens the crack each winter until the crown has to be rebuilt rather than repaired.
  • Birds, squirrels or nesting debris in the flue. An open or uncapped flue is an invitation, and nests block the draft your fireplace depends on. A proper cap with mesh stops animals from getting in without restricting airflow.
  • A cap that’s tilted, loose or dented. Wind can lift a badly fitted cap, and a loose cap bangs against the flue tile and can chip it. A dented mesh also traps creosote and stops doing its spark-arresting job.
  • Staining or efflorescence on the upper brick. White powdery stains or dark streaks near the top of the chimney point to water soaking in from a failed crown or a poor seal at the cap. Catching it early keeps the repair to the crown instead of a larger masonry job.

Our Chimney Cap & Crown Process – Step by Step

  1. 1
    Book the visit. Tell us what you’ve noticed and we’ll set a time. We answer 24/7 on the phone, and fast dispatch runs from 7am to 7pm, Sunday through Friday. We’re closed Saturday.
  2. 2
    Inspect from the ground and at the top. We look at the crown, cap, flue tiles and the upper masonry, checking for cracks, rust and loose mortar. Where a liner is involved, a camera inspection shows the flue’s condition so recommendations are based on what we see, not a guess.
  3. 3
    Show you the findings. We explain what we found, photograph the problem areas where possible, and tell you plainly which items need fixing now and which can safely wait. Nothing gets recommended without evidence you can look at yourself.
  4. 4
    Give you a written, flat-price estimate. You get the price before any work starts, agreed in writing. No surprise add-ons once the cap comes off or the crown is opened up.
  5. 5
    Do the work and clean up. We install or replace the cap, repair or coat the crown, and check the seal before we leave. The job ends with the chimney top watertight and the work area cleared.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

How Much Does Chimney Cap & Crown Cost in Gravesend?

Cost depends on which part of the job you need and how much access the roof allows. These are typical estimated ranges for the Gravesend market; your written estimate sets the final price.

Service Typical Estimated Range What Drives the Price
Standard cap installation (single flue, stainless) $180 – $350 Flue size, cap type, roof pitch and access
Cap replacement (removing an old cap) $200 – $400 Condition of old cap, flue tile damage underneath
Copper or custom-fabricated cap $350 – $900 Material, number of flues, custom sizing
Crown coating (sound crown, hairline cracks) $250 – $550 Crown size and access
Crown repair or partial rebuild $400 – $900 Extent of cracking, mortar work needed

What moves you up or down that range: the number of flues, whether the roof is walkable or needs staging, and whether the crown is a coating job or a rebuild. A cape-style roof in Midwood or a steeper pitch near Marine Park changes how much setup the job needs. To avoid overpaying, get a written flat price before work starts, and ask what the estimate includes: removal of the old cap, new sealant, and cleanup are all part of the quote. Our estimates are free, nothing is recommended without evidence you can see, and we’ll tell you when a repair can safely wait.

Chimney Cap & Crown Near Gravesend – Our Service Area

We work across Gravesend and the surrounding neighborhoods: Bensonhurst, Sheepshead Bay, Brighton Beach, Coney Island, Midwood, Dyker Heights, Flatlands, Borough Park, Marine Park, Mill Basin and Bergen Beach. Most jobs in these areas are booked within a few days, and same-day visits are possible where the schedule allows. If you’re nearby and need the same service, see our chimney cap & crown and chimney cap & crown pages for those areas, or start with chimney sweep in Gravesend if the flue needs cleaning too.

Serving Gravesend, NY – Our Local Coverage Area

We serve Gravesend and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked Questions – Chimney Cap & Crown in Gravesend

Schedule Your Chimney Cap & Crown Service in Gravesend Today

Call (855) 342-5978 to book a cap or crown visit in Gravesend. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. You get a free, no-obligation estimate, a flat price agreed before we start, and a straight answer on what needs fixing now and what can wait. One specialist for the full chimney, from chimney cap & crown work through sweeping and repair. See our chimney repair and chimney inspection pages if you need those checks first.

Written by the team at Chimney Sweep Gravesend.

Why Gravesend Chooses Chimney Sweep Gravesend

We set the standard for chimney cap & crown in Gravesend.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

The local pro we connect you with is certified and meets all state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Gravesend

Getting your chimney cap & crown handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your chimney cap & crown needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

We Book a Time That Works for You

A background-checked, certified technician arrives at the time we agree on.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney cap & crown pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A local pro comes out to measureLicensed and insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Gravesend Customers Say

Trusted by homeowners across Gravesend and surrounding areas.

★★★★★

"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."

Yolanda Dawson
★★★★★

"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."

Renee Brooks
★★★★★

"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."

Daniela Martinez

Ready for Chimney Cap & Crown in Gravesend?

Call now for a free estimate, or request one below. The local pro we connect you with is licensed and insured, and here with fast help in Gravesend.

(855) 342-5978

Request a Free Estimate in Gravesend

Tell us about your chimney cap & crown needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Local Service Coverage
Chimney Sweep GravesendChimney Sweep BensonhurstChimney Sweep Sheepshead BayChimney Sweep Brighton BeachChimney Sweep Coney IslandChimney Sweep MidwoodChimney Sweep Dyker HeightsChimney Sweep FlatlandsChimney Sweep Borough ParkChimney Sweep Marine ParkChimney Sweep Mill BasinChimney Sweep Bergen BeachChimney Sweep KensingtonChimney Sweep Bay RidgeChimney Sweep FlatbushChimney Sweep Sunset ParkChimney Cap & Crown GravesendChimney Cap & Crown BensonhurstChimney Cap & Crown Sheepshead BayChimney Cap & Crown Brighton BeachChimney Cap & Crown Coney IslandChimney Cap & Crown MidwoodChimney Cap & Crown Dyker HeightsChimney Cap & Crown FlatlandsChimney Cap & Crown Borough ParkChimney Cap & Crown Marine ParkChimney Cap & Crown Mill BasinChimney Cap & Crown Bergen BeachChimney Cap & Crown KensingtonChimney Cap & Crown Bay RidgeChimney Cap & Crown FlatbushChimney Cap & Crown Sunset ParkChimney Repair GravesendChimney Repair BensonhurstChimney Repair Sheepshead BayChimney Repair Brighton BeachChimney Repair Coney IslandChimney Repair MidwoodChimney Repair Dyker HeightsChimney Repair FlatlandsChimney Repair Borough ParkChimney Repair Marine ParkChimney Repair Mill BasinChimney Repair Bergen BeachChimney Repair KensingtonChimney Repair Bay RidgeChimney Repair FlatbushChimney Repair Sunset ParkFireplace Repair GravesendFireplace Repair BensonhurstFireplace Repair Sheepshead BayFireplace Repair Brighton BeachFireplace Repair Coney IslandFireplace Repair MidwoodFireplace Repair Dyker HeightsFireplace Repair FlatlandsFireplace Repair Borough ParkFireplace Repair Marine ParkFireplace Repair Mill BasinFireplace Repair Bergen BeachFireplace Repair KensingtonFireplace Repair Bay RidgeFireplace Repair FlatbushFireplace Repair Sunset ParkChimney Inspection GravesendChimney Inspection BensonhurstChimney Inspection Sheepshead BayChimney Inspection Brighton BeachChimney Inspection Coney IslandChimney Inspection MidwoodChimney Inspection Dyker HeightsChimney Inspection FlatlandsChimney Inspection Borough ParkChimney Inspection Marine ParkChimney Inspection Mill BasinChimney Inspection Bergen BeachChimney Inspection KensingtonChimney Inspection Bay RidgeChimney Inspection FlatbushChimney Inspection Sunset Park
Call Now - We Answer 24/7