Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Gravesend?
Chimney cap and crown work in Gravesend typically runs $350 to $650 for a standard stainless cap installed, and $600 to $1,400 for crown repair or rebuild, depending on the crown’s size and condition. A single cap on a straightforward flue is at the lower end; a full crown pour or rebuild on a wide masonry chimney sits at the top. We set the exact figure per job with a written estimate, and the estimate is free.
Caps and crowns fail quietly. The cap rusts or a wind gust takes it off, the crown develops hairline cracks, and the next hard rain finds a path into the flue and the ceiling below. Gravesend’s stock of older brick homes and low-slung rowhouses makes this a common repair, not an unusual one. Getting the numbers straight before you call helps you judge the quote you get.
Key Takeaways
- A standard cap installed: roughly $350 to $650.
- Crown repair (patching and sealing cracks): roughly $600 to $950.
- Full crown rebuild: roughly $950 to $1,400 or more for large or complex crowns.
- Caps protect the flue from rain, animals and debris; crowns shed water off the chimney top. Both matter, and both are often skipped by sweep-only services.
- Estimates are free, and the written estimate sets the final price. Call (855) 342-5978.
Chimney Cap & Crown Cost Breakdown (2026)
These are typical estimated ranges for the Gravesend market. Actual pricing depends on chimney height, flue count, crown condition and access. The table is a planning tool, not a quote.
| Item | Typical Estimated Range | Notes |
|---|---|---|
| Single-flue stainless cap, installed | $350 – $500 | Most common job; protects one flue opening |
| Multi-flue cap (single canopy over several flues) | $450 – $650 | Common on wider masonry chimneys |
| Custom-fit cap (oversized or irregular chimney top) | $550 – $750 | Fabricated to fit; used when stock caps won’t seal properly |
| Crown crack repair and seal | $600 – $950 | Patching and sealing hairline and moderate cracks |
| Crown rebuild (full replacement) | $950 – $1,400+ | Removing failed crown, forming and pouring a new one |
| Crown wash / overhang rebuild | $1,200 – $1,600+ | When the crown has no proper overhang and water runs down the masonry |
| Cap plus crown repair, bundled | $850 – $1,450 | Combined weatherproofing in one visit |
| Animal guard / spark screen add-on | $75 – $150 | Fits to an existing cap or as a standalone guard |
What pushes a job toward the higher end? Chimney height and pitch of the roof matter, because access takes time. A crown that’s cracked all the way through needs a rebuild rather than a patch, and that’s the biggest single jump in price. Custom caps on odd chimney tops cost more than stock stainless. And if the flue has no cap and hasn’t had one for years, we may find debris or a damaged flue tile underneath, which is a separate repair.
We install caps and crowns from brands the trade trusts, including Copperfield, Gelco, Olympia Chimney and Famco. Materials make up a smaller share of the bill than labor, but a cheap cap that rusts out in a few winters costs more over time than one built for the job. We name the brands we install because materials matter as much as labor.
What Affects Chimney Cap & Crown Pricing in Gravesend
- Chimney height and roof access. A tall chimney on a steep rowhouse roof takes longer to set up safely. Access is a real cost, not padding.
- Number of flues. A single flue needs one cap. A chimney with two or three flues needs a larger canopy or multiple caps, which raises the price.
- Crown size and shape. A wide crown with a proper overhang uses more material and more forming time than a small one. Irregular shapes cost more to rebuild.
- Condition of the crown. A hairline crack can be sealed. A crown that’s crumbling, has lost its slope, or has no overhang needs a full rebuild.
- Material choice. Stainless steel caps last longer and cost more than galvanized. Custom fabrication costs more than a stock size.
- Hidden damage. If water has been getting in, the flue tile or mortar at the top may need repair, which adds cost. We find this during the inspection and tell you before any work starts.
Gravesend’s weather plays a part. Freeze-and-thaw cycles through the winter work on any crack in the crown, widening it season by season. A masonry crown that’s cracked in autumn is usually worse by spring. That’s one reason we recommend sealing small cracks early rather than waiting for a leak to show up inside the house.
How to Save on Chimney Cap & Crown
There’s no magic discount here, but there are sensible ways to keep the bill down:
- Fix the crown before it fails completely. Sealing a crack at $600 to $950 beats a rebuild at $950 to $1,400 or more. Watch the crown after every hard winter and act early.
- Bundle cap and crown work. If both need attention, having them done in one visit saves on access and setup. Combined jobs typically land lower than two separate visits.
- Choose a stock stainless cap when it fits. Custom caps are worth it on irregular chimneys, but a standard size is fine on most single-flue tops.
- Get the inspection first. Knowing exactly what’s wrong means you pay for the right repair, not a guess. Our inspections are backed by hands-on repair experience, so the recommendation comes from someone who’ll be doing the work.
- Ask for the written estimate. It’s free, and it sets the final price. Call (855) 342-5978 to book one.
Why Cap and Crown Work Belongs With a Chimney Specialist
A cap and crown are the top of the chimney, but they’re not separate from the rest of it. Water that gets past a failed crown runs down the flue, into the smoke chamber, and sometimes into the mortar joints of the chimney itself. A general handyman can glue a cap on. What a handyman usually can’t do is look at the flue liner below it and tell you whether the water damage has already reached it.
That’s the difference a chimney-only focus makes. When we inspect a chimney for cap and crown work, we’re also looking at the liner, the firebox and the smoke chamber, because we repair those too. If the inspection turns up a cracked flue tile, we can resurface the liner with HeatShield, the ceramic resurfacing system used across the professional chimney trade. Most sweep-only companies don’t offer that. It means you’re not handed off to a second contractor halfway through.
We handle the full chimney from one company: sweep, inspect, cap, crown, repair and fireplace work. If you’re starting from a routine cleaning, our chimney sweep in Gravesend visits include a look at the cap and crown as part of the inspection. And if you already know the cap or crown is the problem, the chimney cap & crown page covers what the work involves.
What’s Included in a Cap or Crown Job
Every job starts with a look at the chimney top, not a guess from the ground. Here’s what the work typically covers:
- Inspection of the crown and flue top. We check for cracks, missing mortar, a failed slope or a missing overhang, and check whether the flue tiles are intact.
- Cap sizing and fit. The cap has to cover the flue opening with enough clearance for smoke to escape and enough mesh to keep animals and sparks out. A cap that’s too tight causes draft problems.
- Crown prep and repair or rebuild. Cracks get cleaned and sealed. A failed crown gets removed, the top of the chimney prepped, and a new crown formed with the correct slope and overhang so water sheds away from the masonry.
- Sealing and finishing. The crown-to-flue joint gets sealed so water can’t wick in at the seam.
None of this is a job to attempt from a ladder. Crown work means working at height on a roof edge, often on a slope, with mortar and tools. A fall from a Gravesend rowhouse roof is serious. We recommend leaving cap and crown work to a trained professional who does it regularly, with the right access and safety setup.
How Long Does It Take?
A standard cap install usually takes under two hours once we’re on site. Crown repair takes a bit longer, typically half a day. A full crown rebuild is usually a full-day job, and sometimes two if the crown is large or the weather doesn’t cooperate with mortar curing. We’ll tell you the expected time when we give the written estimate, so you can plan around it.
FAQs – Chimney Cap & Crown Cost
How much does a chimney cap cost in Gravesend?
A standard stainless cap installed in Gravesend typically runs $350 to $500. Multi-flue canopies run $450 to $650, and custom-fit caps for odd chimney tops run $550 to $750. Call (855) 342-5978 for a free estimate on your chimney.
How much does crown repair cost in Gravesend?
Crown repair typically costs $600 to $950, while a full crown rebuild runs $950 to $1,400 or more. The difference comes down to whether the crown can be sealed or has to be replaced. A free estimate tells you which one you need. Call (855) 342-5978.
Is it cheaper to repair the crown or rebuild it?
Repair is cheaper when the crown is structurally sound with only surface cracks. Once the crown is crumbling, has lost its slope or has no overhang, a rebuild is the only fix that lasts, and a patch will fail within a season or two. We’ll tell you honestly which one your crown needs. Call (855) 342-5978 for a free estimate.
Do I really need a chimney cap?
Yes, and it’s the least expensive weatherproofing you can add to a chimney. A cap keeps rain out of the flue, stops birds and squirrels from nesting inside, and keeps sparks off the roof. Without one, water enters the flue every storm and works on the liner and mortar over time. Call (855) 342-5978 to get one fitted.
Can you come today?
Often, yes. Same-day service is available for cap and crown work when the schedule allows. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Call (855) 342-5978 and we’ll book you into the next opening.
Getting a Straight Number for Your Chimney
Pricing a cap and crown job comes down to what’s actually on your roof: the height, the number of flues, the condition of the crown. A written estimate is the only way to know the real number for your chimney. We give free estimates, and the written estimate sets the final price. Our technicians have up to 15 years of experience, and we specialize in chimney and fireplace systems only. If you’ve been putting off a cap or crown repair because you didn’t know what it would cost, now you do. Call (855) 342-5978. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Gravesend market as of 2026. Chimney Sweep Gravesend offers free estimates – call (855) 342-5978.
Written by the team at Chimney Sweep Gravesend.
What Our Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Yolanda Dawson"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Renee Brooks"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Daniela Martinez