Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Fireplace Repair for Gravesend Homeowners
A fireplace that smokes into the room, a pilot that won’t stay lit, or a firebox wall that’s cracked and crumbly needs a specialist, not a general handyman. Fireplace repair in Gravesend means diagnosing the whole system – the firebox, damper, liner, and draft path – and fixing the part that’s actually failing. Our technicians have up to 15 years of experience on gas, wood-burning, and insert units, and they work with professional-grade materials instead of big-box substitutes. We connect you with a vetted local pro who is licensed and insured as their state requires, and the written estimate sets the final price before any work begins. Same-day appointments are often possible. Call (855) 342-5978 and we’ll book your sweep and inspection.
What Our Fireplace Repair Service Includes
Every fireplace is a small system, and the six jobs below cover the parts that fail most often. We handle each one as part of a single service relationship, so nothing gets handed off to a second contractor who’s never seen your chimney.
Gas Fireplace Repair
Gas fireplaces fail in predictable ways: weak flame, a burner that lights unevenly, soot on the logs, or a smell of gas when the unit is off. Those symptoms usually point to a clogged burner orifice, a failing valve, or a venting problem rather than the logs themselves. We service gas units with the same diagnostic approach we use on wood-burning fireplaces, checking the firebox, the venting, and the gas connection before recommending parts. Gas work carries real safety stakes, so anything involving the gas line itself is left to a trained and licensed professional.
Wood Burning Fireplace Repair
A wood-burning fireplace that smokes, burns sluggishly, or leaves heavy creosote is telling you the draft or the firebox has changed. Masonry joints erode over time, and a firebox that’s lost its refractory lining will let heat into the surrounding structure instead of up the flue. We inspect the firebox, damper, smoke shelf, and flue together, because a smoking fireplace is rarely a single-part problem. Then we repair the firebox and damper with materials rated for the heat, and we tell you plainly if any part of the job can safely wait.
Fireplace Insert Service
Inserts sit inside an existing firebox and need their own connection to the flue, and a sloppy install is one of the most common reasons an insert underperforms. If your insert smokes, heats poorly, or has a loose surround, the liner connection or the seal around the unit is usually the culprit. We service inserts and check that the liner meets the unit correctly, using DuraFlex components where a liner needs replacing. We also clean around the insert, since debris trapped behind the surround is a fire risk that a standard sweep can miss.
Damper Repair
The damper is the metal plate that opens and closes the flue, and when it sticks, rusts, or won’t seal, you lose control of the fire and the heat. A damper left partly open in the off-season lets conditioned air escape and lets cold air and pests in. We repair or replace dampers, check the frame and pivot, and confirm the plate closes flush so the fireplace drafts the way it should. A damper that’s stuck open is worth fixing before the next burning season.
Firebox Repair
The firebox takes the direct heat, and its brick and mortar joints crack and spall over time – that’s normal wear, not neglect. What matters is catching it before the cracks open into the surrounding masonry, where heat and moisture can do real damage. We rebuild firebox panels and joints with heat-rated refractory materials, and we photograph the damage before and after so you can see what was repaired. If the firebox only needs minor patching, we say so instead of quoting a rebuild.
Pilot Light Repair
A pilot that won’t stay lit is the most common gas fireplace call we get, and it’s usually a dirty thermocouple, a weak thermopile, or a draft blowing across the pilot assembly. Those parts are small, inexpensive, and easy to test once you know what you’re looking at. We diagnose the pilot and the safety shutoff together, because a pilot problem can also signal a venting issue. We replace the failed component and confirm the unit holds a steady flame before we leave. Gas components are handled only by a trained professional.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Fireplace Repair
We work with a curated set of professional-grade product lines because the materials in a fireplace matter as much as the labor. HeatShield is the ceramic resurfacing system we use for liner repair – it restores a damaged flue from the inside rather than forcing a full tear-out, and it’s a repair-grade solution that most sweep-only companies simply don’t offer. We also service and install DuraFlex liners, which are the flexible stainless components many inserts and wood fireplaces rely on, and we know where those liners wear at the joints and the top plate.
On the masonry side, we work with Copperfield and Gelco products for caps, crowns, and weatherproofing, so the repair holds up through freeze-and-thaw cycles instead of failing within a season. We name the brands we install because you deserve to know what’s going into your chimney, not just that “parts are included.” Whether you have HeatShield, DuraFlex, Copperfield, Gelco, or any other make, we can help – and if a brand isn’t right for your unit, we’ll tell you that too.
Signs You Need Fireplace Repair Right Now
Some symptoms are cosmetic. Others mean stop using the fireplace until someone qualified looks at it. Here’s how to sort them.
- Smoke rolling into the room. A fireplace that smokes when it used to draft fine usually has a blocked flue, a damaged damper, or a firebox that’s lost its seal. Smoke in the room means the exhaust isn’t going where it should, so stop burning and get it checked.
- Cracked or crumbly firebox walls. Hairline cracks in the firebox are common, but open cracks or crumbling mortar let heat reach the masonry behind the firebox. That’s the kind of damage that gets expensive if it’s ignored, and it’s fixable with refractory materials when caught early.
- A gas smell or a pilot that won’t hold. Any gas odor, or a pilot that keeps going out, is a safety issue rather than a nuisance. Gas fireplaces need a trained professional on the gas side, and a pilot that won’t stay lit can also point to a venting problem.
- Rust, water stains, or a damp firebox. Water getting into a fireplace usually traces back to a failed cap or crown, not the firebox itself. The staining is the visible sign; the actual leak is up top, and it needs weatherproofing before it damages the liner.
- Heavy creosote or a smoky odor in the off-season. Glazed, tar-like creosote in the flue raises the risk of a chimney fire, and a smoky smell in summer means the draft is pulling air back down. A sweep and inspection will tell you whether the issue is creosote, a damper, or the cap.
Our Fireplace Repair Process – Step by Step
We keep the process transparent because the biggest worry homeowners have is being told they need work they can’t verify. Here’s how a fireplace repair goes from first call to finished job.
- 1
Book the visit. We take your address and a description of the problem, then schedule a sweep and inspection. Same-day appointments are often available, and the written estimate is set per job before any repair begins.
- 2
Inspect with a camera. We run a camera through the flue and check the firebox, damper, smoke shelf, and cap. The camera inspection and photo report are included, so you see what we see – not just our word for it.
- 3
Explain the findings, then quote. We show you the photos, name the failed parts, and go over the options with a flat-price estimate. If part of the job can safely wait, we say so, and we never recommend liner or masonry work without evidence you can see.
- 4
Do the repair. Whether it’s a damper, a firebox panel, a pilot assembly, or a HeatShield liner resurfacing, we use materials rated for the job and install them the way the manufacturer intends. Brands like DuraFlex and Copperfield are chosen for the specific repair, not swapped in as a substitute.
- 5
Confirm and clean up. We test the draft, confirm the firebox and damper work, and leave the area clean. You get the before-and-after photos and a clear note on what to watch for next season.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fireplace Repair Cost in Gravesend?
Fireplace repair in Gravesend typically runs $150 – $350 for a small fix like a damper, pilot assembly, or minor firebox patch, and $400 – $1,200 or more for larger work like a firebox rebuild or a liner resurfacing with HeatShield. A typical damper repair runs $150 – $300 depending on whether the frame needs work; a pilot light repair usually lands in the $150 – $275 range; and firebox repair depends on how many panels and joints are involved. Liner work sits at the higher end, and that’s where a flat-price estimate matters most.
What affects the price: the type of fireplace (gas, wood, or insert), how accessible the firebox and flue are, whether the repair is a single part or part of a larger weatherproofing job, and the materials required. To avoid overpaying, ask for the camera photo report before you approve anything – nothing gets recommended here without evidence you can see. Our free estimate covers the inspection findings and a written price, and we’ll tell you what can safely wait. The written estimate sets the final price, so there are no surprise add-ons once the work starts.
| Repair type | Typical estimate |
|---|---|
| Damper repair or replacement | $150 – $300 |
| Pilot light / gas component repair | $150 – $275 |
| Minor firebox patching | $200 – $400 |
| Firebox panel rebuild | $500 – $1,500 |
| Liner resurfacing (HeatShield) | $1,200 – $2,500 |
Prices are estimates only. Call (855) 342-5978 for an exact quote – estimates are free. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Fireplace Repair Near Gravesend – Our Service Area
We serve Gravesend and the surrounding neighborhoods of Brooklyn, including Bensonhurst, Sheepshead Bay, Brighton Beach, Coney Island, Midwood, Dyker Heights, Flatlands, Borough Park, Marine Park, Mill Basin, and Bergen Beach. A vetted local pro can often reach most of these areas the same day, and scheduled visits are confirmed when you book. If you’re in Gravesend, our chimney sweep gravesend service pairs naturally with fireplace repair, and the nearby areas get the same approach. We also handle fireplace repair and fireplace repair for neighbors just outside our core area. Wherever you are in this part of Brooklyn, the inspection and repair process is the same.
Serving Gravesend, NY – Our Local Coverage Area
We serve Gravesend and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fireplace Repair in Gravesend
Fireplace repair is fixing the parts of a fireplace that have failed – the firebox, damper, liner, pilot assembly, or insert connection – so the unit burns safely and drafts correctly. It’s different from a sweep, which removes creosote, and different from chimney repair, which handles the masonry above. In Gravesend, we diagnose the whole system first and then repair the specific part that’s causing the problem. Call (855) 342-5978 for a free estimate.
Most single-part repairs, like a damper or pilot assembly, take one visit of an hour or two. Firebox rebuilds and liner resurfacing take longer, often a full day or a return visit once materials are confirmed. The inspection comes first, and the estimate tells you the expected timeline before any work starts. If a repair can safely wait, we say so rather than rushing a job that doesn’t need to happen today. Call (855) 342-5978 to book a visit.
Typical estimates range from $150 – $300 for a damper repair to $1,200 – $2,500 for liner resurfacing, with firebox work landing between $200 and $1,500 depending on scope. The final price depends on the fireplace type, the materials required, and how much of the system is affected. Every repair is priced per job by a written estimate, so you know the cost before we start. Call (855) 342-5978 for an exact quote – estimates are free.
Yes. We service and install HeatShield, DuraFlex, Copperfield, Gelco, and Olympia Chimney equipment. HeatShield is the ceramic resurfacing system we use for liner repair, and DuraFlex is one of the flexible liner components we work with on inserts and wood fireplaces. Whether you have one of these brands or any other make, we can help. Call (855) 342-5978 and tell us what you have.
Same-day appointments are often possible depending on the job and the schedule. We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. We’re closed Saturday. Call (855) 342-5978 and we’ll confirm the earliest opening for your Gravesend address.
We stand behind the work with a satisfaction guarantee, and the materials carry the manufacturer’s coverage on top of that. We’ll explain what’s covered on your specific repair in the written estimate so there’s no confusion later. If something isn’t right after the job, call us and we’ll come back and make it right. Call (855) 342-5978 to go over the details for your fireplace.
Clear the hearth area and move anything fragile or flammable a few feet back, then let us know what the fireplace has been doing – when it smokes, when the pilot goes out, what you’ve noticed. If you have the manual or the model number, have it handy, though it’s not required. Leave ash removal to us, since the camera inspection is easier on a clean firebox and the creosote is better handled with the right tools. Call (855) 342-5978 to schedule.
Schedule Your Fireplace Repair Service in Gravesend Today
If your fireplace is smoking, your pilot won’t stay lit, or you’re not sure what that crack in the firebox means, get a real diagnosis before the next burning season. We’ll inspect with a camera, show you the photos, and give you a flat-price estimate in writing – nothing recommended without evidence you can see. Call (855) 342-5978 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Gravesend.