Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Dyker Heights
Chimney repair in Dyker Heights usually starts with a cracked flue liner or a chimney crown that’s given way after decades of hot and cold swings, and the fix runs from repointing mortar to a full reline. If your fireplace has been smoking, your bricks are flaking, or you’ve spotted a damp stain on the ceiling near the chimney, the answer starts with an inspection you can actually see the results of. We work chimney repair across this neighborhood and know its housing stock. Our technicians have up to 15 years of experience, and we answer 24/7 at (855) 342-5978.

Why Dyker Heights Homeowners Call Chimney Sweep Gravesend for Chimney Repair
We’re a chimney-and-fireplace specialist, not a general handyman outfit that adds a sweep to the menu. That focus matters in Dyker Heights, where the chimneys were built for real fires, not decoration, and the diagnosis has to match.
Every repair begins with a camera inspection and a photo report you keep. You see what we see before anything is recommended. If a job can safely wait until spring, we say so plainly. If it can’t, we show you why on the screen.
We name the materials we install because they matter as much as the labor. HeatShield, DuraFlex and Copperfield are professional-grade names, and we work with them where they fit the job. The local pro we connect you with is licensed and insured as their state requires. And we don’t sit on old terracotta. We replace and reline what’s failing instead of patching over it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Dyker Heights
Brick chimneys in Dyker Heights carry a specific load: fall-through-spring fires, then humid summers that let water work its way in. The repair list below covers what we see most often on the detached homes here.
Mortar Repointing
Mortar joints in an older chimney take the weather first, then crack and fall out, leaving the bricks loose. Repointing in Dyker Heights means grinding out the failed joints and packing in fresh mortar matched to the original so the chimney moves with the house instead of against it. We see this most often on the taller, owner-expanded homes where an upper chimney section was added years after the original.
Spalling Brick Repair
Spalling is the flaking and popping off of the brick face, usually after water gets behind the masonry and freezes. In Dyker Heights the culprit is often a failed crown or cap letting moisture in, not the brick itself. We replace the damaged units and fix the source, so the new brick doesn’t fail the same way within a few seasons.
Chimney Waterproofing
A breathable waterproof coating on the masonry keeps rain out while letting trapped moisture escape. That’s the right call for Dyker Heights’ humid summers, where a sealed-in chimney will push water into the flue instead. Waterproofing after repointing and new flashing is what actually holds the repair together long-term.
Flashing Repair
Flashing is the metal where the chimney meets the roof, and it’s the most common leak point on a Dyker Heights house. Failed flashing shows up as a ceiling stain far from the chimney, which is why a proper inspection checks the roof line, not just the flue. We repair or replace the flashing and tie it back to the roof so the joint drains the way it should.
Trusted Brands We Service in Dyker Heights
We install and service professional-grade chimney products, and we name them because the material is half the repair. HeatShield is a ceramic resurfacing system for relining a damaged flue, and it’s a repair-grade option most sweep-only companies don’t carry. DuraFlex liners handle the full reline when the old terracotta has to come out. Copperfield and Gelco round out the crown and cap work. These are the names certified chimney institutes know, and we work with them where the job calls for it. We don’t stock parts in a warehouse or promise same-day turnaround from a shelf. We specify the right product, order it, and install it built for the trade.
Common Chimney Repair Problems We See in Dyker Heights Homes
Most repair calls here trace back to the same handful of issues, and the neighborhood’s timing and housing stock both play a part.

- Homeowners rely on annual cleaning alone. A yearly sweep clears the flue but doesn’t tell you the liner is cracked. Without a camera inspection, a failing liner goes unnoticed until draft problems or carbon monoxide risk show up, and by then the repair is bigger.
- Repairs get scheduled after the lights go up. Once the Dyker Heights Christmas lights draw crowds in December, parking and street access become nearly impossible for service vehicles. Jobs that should be simple turn into hard logistics, which is exactly why locals book before Thanksgiving.
- Original terracotta liners get patched with generic mortar. Smearing mortar over a cracked liner doesn’t restore the flue, and it leads to recurring spalling and a deteriorating crown. A proper reline is the fix.
- Failed crowns and caps let water in all summer. The humid subtropical climate here means the off-season moisture keeps degrading creosote and masonry. Spring inspection catches what fall cleaning alone won’t.
How a typical repointing or reline job goes in Dyker Heights
A common issue on these homes is original terracotta flue liners that crack from years of heating and cooling, which in turn leads to spalling brick and a deteriorated chimney crown. A qualified local technician runs a Level 2 inspection with a camera, documents the damage in photos, and recommends repointing or relining with a product like HeatShield or DuraFlex to restore the flue’s integrity. You get the evidence before the recommendation, so you’re not taking anyone’s word for it.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Dyker Heights, NY
Chimney repair in Dyker Heights runs from a few hundred dollars for repointing a small section up to a full reline or rebuild in the low thousands, depending on scope. These are typical estimates for the neighborhood’s market, and the written estimate sets the final price. Here’s how the line items usually break down:
| Repair | Typical range in Dyker Heights |
|---|---|
| Mortar repointing (section) | $350 – $900 |
| Flashing repair or replacement | $250 – $650 |
| Chimney waterproofing | $300 – $800 |
| Spalling brick repair | $400 – $1,200 |
| HeatShield liner resurfacing | $1,800 – $3,500 |
| Full reline (DuraFlex) | $2,500 – $6,000 |
| Chimney rebuild (upper section) | $4,000 – $12,000 |
The estimate is free and set per job. Camera inspection and a photo report are part of the process, so you can see what makes the range land where it does.
We Also Serve Cities Near Dyker Heights
We work across the surrounding neighborhoods too, including Bay Ridge, Bensonhurst, Borough Park and Sunset Park. The housing stock and the seasonal timing are similar, so the same approach applies: inspect first, show the photos, and quote the repair in writing before anything is booked.
Serving Dyker Heights, NY – Our Local Coverage Area
We serve Dyker Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Dyker Heights
Sometimes yes, and sometimes no. If the fireplace is in use, a cracked liner is a carbon monoxide and draft concern, so it needs attention before the next fire. If it can safely wait, we’ll tell you plainly after the inspection. Call (855) 342-5978 to get the camera inspection on the schedule.
Repointing is the answer when the bricks themselves are sound and only the mortar has failed; a rebuild is warranted when the masonry is loose, shifted or missing. The difference is visible on a camera inspection, and we give you the photos so you can see the call. Call (855) 342-5978 for a free estimate.
Before Thanksgiving. That’s when the neighborhood schedules its work, and it’s not arbitrary: once the Dyker Heights Christmas lights go up in December, parking and street access get so tight that even a minor job gets hard. Booking in the fall gets the fireplace ready for holiday entertaining and keeps the repairs simple. Call (855) 342-5978 to lock in a time.
Same-day repair is possible when the scope is small and the parts aren’t special-ordered, though a reline or rebuild is typically booked in. We don’t promise same-day dispatch, but we do answer the phone and quote in writing before booking. Call (855) 342-5978, and we answer 24/7.
First-degree creosote is the light, flaky soot a brush clears easily; third-degree creosote is a hard, glazed crust that has fused to the flue and won’t come off with sweeping alone. Third-degree deposits often point to a liner problem underneath, so a camera inspection matters before anyone promises a simple cleaning. Call (855) 342-5978 for an inspection and a free estimate.
Book Chimney Repair in Dyker Heights
We’re a chimney-and-fireplace specialist, and the work we do here is the same you’d want on any Dyker Heights home: an inspection you can see, a written estimate before anything’s booked, and materials built for the trade. Call (855) 342-5978 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Gravesend.