Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Midwood
Most of the chimneys we look at in Midwood don’t serve a fireplace at all. They vent the boiler and water heater in the basement, and that changes what a sweep actually needs to do. We work the brick two- and three-family houses throughout Midwood, from the blocks off Ocean Avenue to the quieter side streets near Avenue M, and we bring a camera, not just brushes. Our technicians have up to 15 years of experience reading these older flues. Call (855) 342-5978 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Why Midwood Homeowners Call Chimney Sweep Gravesend for Chimney Sweep
Midwood is full of pre-war and mid-century brick houses, and those houses have chimneys that have been quietly working for a long time. We understand that history because it’s the work we focus on. When a homeowner on a Midwood block calls us, we’re not showing up to sell a cleaning. We’re showing up to find out what’s actually going on inside a flue that may have been handling gas exhaust since an oil-to-gas conversion decades ago.
Our reputation in Midwood comes from doing the boring, useful thing: running a camera, showing the homeowner the screen, and being honest about what can wait. If a boiler flue is clean and venting, we say so. If a clay-tile liner has spalled or a crown has cracked from freeze-thaw, we show that too. Nothing gets recommended without evidence the homeowner can see for themselves. That’s how you build trust with people who’ve been burned by a brush-only sweep before.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Sweep Services in Midwood
We handle the full range of chimney work for Midwood’s brick houses, whether the stack serves a fireplace or a basement boiler. Here’s what that looks like.
Level 2 Inspection
A Level 2 inspection is the one that matters most in Midwood, because so many of these chimneys have liners that have been eaten by gas condensate and coastal freeze-thaw for years. We run a camera through the flue so you can watch the condition of the tile and the joints on screen. This is the inspection that catches what a brush alone never will.
Creosote Removal
If your Midwood house does have a wood-burning fireplace, creosote is the concern. We remove it properly, including the glazed, tar-like buildup a brush can’t touch on its own. We’ll tell you honestly whether your burning habits and the flue’s condition call for it, rather than pushing it on a chimney that’s only ever vented gas.
Soot Removal
Soot removal is the sweep itself, done with the right tools for a brick flue and cleaned up after. In Midwood, this often means clearing soot and debris from a boiler flue that hasn’t been touched in years. We contain the mess and leave the room as we found it.
Annual Sweep
An annual sweep keeps a Midwood chimney on a schedule so small problems don’t become liner jobs. We check the flue, sweep what needs sweeping, and note anything worth watching. For a house that only runs a gas boiler, this is often lighter work than people expect.
The Midwood Chimney Most Sweeps Get Wrong
Here’s the local reality that shapes almost every job in Midwood. On the 1920s through 1950s brick two- and three-family houses, a lot of chimneys don’t vent a fireplace. They vent the boiler and the water heater in the basement. The giveaway is a chimney with a gas flue cap and no hearth upstairs. When a sweep shows up with brushes only and no camera, that cracked clay-tile boiler flue stays untouched. No soot comes down, so it gets called clean. Meanwhile a venting hazard sits right there in the stack.
In a typical Midwood semi-detached brick house, the boiler flue is an original unlined or clay-tile stack that has been handling gas exhaust since the oil-to-gas conversion decades ago. Condensate and freeze-thaw winters have spalled the tile and cracked the crown. A qualified local pro runs a camera you can watch, shows the failed liner joint or spalled section on screen, and only then recommends a HeatShield or DuraFlex liner. A brush-only sweep just masks the real venting problem. We’d rather show you the problem than describe it.

Trusted Brands We Service in Midwood
We install and work with professional-grade brands because materials matter as much as labor. For liner work in Midwood’s aging brick chimneys, we use HeatShield, the ceramic resurfacing system, and DuraFlex liners. We also work with Gelco and Copperfield. These are the names you’ll find in the professional chimney trade, not the substitutes on a big-box shelf. We don’t stock parts, so every job is measured and fitted for your specific flue. You’ll get a written estimate and a clear plan for the work, and the price is set per job by that estimate.
Common Chimney Sweep Problems We See in Midwood Homes
- A brush-only sweep skips the camera. When the flue never burned wood, no soot comes down and it gets called clean, even with a cracked boiler flue behind it. That’s a venting hazard left in place.
- Spalled clay tile from gas condensate. Decades of acidic exhaust eat at the clay-tile liner, and the damage often goes unreported because nobody looked with a camera.
- Crown and flashing damage from freeze-thaw. A humid coastal climate with freezing winters drives moisture into aging brick, cracking crowns and loosening flashing. This gets missed while an unnecessary creosote upsell takes its place.
- Original boiler flues never designed for the current appliance. Many Midwood stacks were built for oil heat and now handle gas, and the flue was never lined for it.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Sweep in Midwood, NY
We set prices per job by a written estimate, so you know the number before we start. A typical annual sweep or soot removal in Midwood runs around $150 to $275, and a Level 1 inspection is often bundled into that visit. A Level 2 inspection with camera runs about $225 to $400, which is the one most Midwood boiler flues actually need. Creosote removal on a wood-burning fireplace runs roughly $250 to $500 depending on buildup. Liner work is quoted separately once we’ve seen the flue. The estimate is free, and nothing gets recommended without camera evidence you can see and approve.
We Also Serve Cities Near Midwood
We work throughout Midwood and the surrounding neighborhoods, including Flatlands, Kensington, Bensonhurst, and Flatbush. The same brick houses, the same boiler-flue quirks, and the same freeze-thaw winters carry over from one block to the next. If you’re just over the line from Midwood, we can help. For the broader picture of what we do, see our chimney sweep services.
Serving Midwood, NY – Our Local Coverage Area
We serve Midwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Sweep in Midwood
Yes, if that chimney vents your boiler or water heater. In Midwood, many chimneys serve the basement boiler rather than a fireplace, and those flues still need inspection and occasional sweeping even without a hearth. A camera run tells you what condition the liner is in. Call (855) 342-5978 for an exact quote – estimates are free.
A Level 2 inspection shows the inside of the liner itself: spalled tile, failed joints, and cracks that a brush skips right past. On a boiler flue that only vents gas, there’s often no soot to signal a problem, so the camera is the whole point. We show you the screen and explain what we see. Call (855) 342-5978 to book one – estimates are free.
Because decades of gas exhaust and freeze-thaw winters spall the clay tile and crack the crown, and a sweep can’t repair that. An unlined or aging clay-tile flue that’s been handling gas since an oil-to-gas conversion often needs a HeatShield or DuraFlex liner. We only recommend it after showing you the failed section on camera. Call (855) 342-5978 for an exact quote – estimates are free.
An annual inspection is a sensible baseline for a boiler flue in Midwood’s older brick houses. Gas appliances produce condensate that wears on the liner over time, and once-a-year eyes on it catch problems early. If your flue is in good shape, we’ll tell you. Call (855) 342-5978 for an exact quote – estimates are free.
First-degree creosote is the light, flaky soot a brush clears easily; glazed third-degree creosote is a hard, tar-like layer a brush skips over. If your Midwood fireplace has that glaze, it calls for proper removal, not a quick pass. We’ll tell you which one you have. Call (855) 342-5978 for an exact quote – estimates are free.
What Happens When You Call
When you call Chimney Sweep Gravesend about your Midwood chimney, we book a visit and set a written estimate per job. The estimate is free. We run the camera, show you what’s there, and tell you plainly what needs doing now and what can safely wait. If it’s a boiler flue with a spalled liner, we’ll show you why before we quote a HeatShield or DuraFlex repair. Call (855) 342-5978 to set up your visit. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening.
Written by the team at Chimney Sweep Gravesend.