Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Fireplace Repair Across Flatbush
If your fireplace is smoking into the room, your damper won’t move, or your gas logs won’t stay lit, we can help. Chimney Sweep Gravesend handles fireplace repair across Flatbush, from the parlor-floor units in the converted row houses off Nostrand and Rogers to the pre-war apartment buildings along Flatbush Avenue and Church Avenue. We know this housing stock because we work in it constantly, and we know that a fireplace problem here is often a chimney problem shared with another unit. Our technicians have up to 15 years of experience, the estimate is free, and nothing gets recommended without camera evidence you can see yourself. Call (855) 342-5978.

Why Flatbush Homeowners Call Chimney Sweep Gravesend for Fireplace Repair
Flatbush is dense, old, and built in layers. A single shared brick chase can serve several flues across two or three units, which is why we treat a fireplace call here as a whole-stack question first. That habit comes from doing the repair work, not just the inspection: when we open a firebox and find spalling mortar or a cracked clay tile, we already know what the relining scope looks like. Our technicians have up to 15 years of experience, and they read the building before they touch the appliance.
We serve Flatbush as part of our broader work across Flatbush and the surrounding neighborhoods, and homeowners tend to call us back year after year because we tell them plainly when a repair can safely wait. We’re a fireplace and chimney specialist, not a handyman outfit, which means we carry the professional-grade parts the job actually needs instead of substituting whatever’s on a big-box shelf. Call (855) 342-5978. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Fireplace Repair Services in Flatbush
Gas Fireplace Repair
Gas fireplaces in Flatbush’s converted row houses often vent into a chase that was originally built for coal or oil, and the flue may never have been properly sized for gas. When a unit won’t hold a draft, the cause is usually in the shared stack, not the firebox. We inspect the full chase, check for backdrafting between units, and confirm the venting before we touch the burner assembly. Our fireplace repair work starts with diagnosis, not replacement.
Wood Burning Fireplace Repair
Wood fireplaces in Flatbush’s limestone row houses and detached Victorians were built for solid fuel, but 80 to 110 years of use leaves a mark. Cracked firebrick, deteriorated mortar joints, and warped dampers are common. We assess the firebox and the flue together, because a wood fireplace that smokes is usually telling you something about the chimney above it.
Fireplace Insert Service
An insert only performs as well as the flue it vents into. In Flatbush’s pre-war buildings, an insert dropped into an unlined or parged brick flue can push creosote and moisture problems downstream. Before any insert goes in, we confirm the liner is sound and, where it isn’t, we reline with DuraFlex or resurface with HeatShield so the appliance has a proper pathway. No insert is safe to run on a flue that hasn’t been checked.
Damper Repair
A damper that’s seized open or rusted shut is one of the most frequent calls we get in Flatbush. In pre-war chimneys built for coal, dampers were often thin and are now seized or missing entirely, which lets humid summer air and rain straight into an unlined firebox. We repair or replace the damper and check the surrounding masonry while we’re in there. A working damper is cheap insurance against a much bigger repair later.
Firebox Repair
Crumbly mortar behind the firebox is common in Flatbush’s older stock. It’s often hidden until a Level 2 inspection, and it has to be addressed before a gas or wood appliance is safe to use. We rebuild fireboxes with proper refractory materials rather than patching with mortar that won’t hold up to heat.
Pilot Light Repair
A pilot that won’t stay lit on a Flatbush gas fireplace is usually a thermocouple, thermopile, or draft problem. When the draft is the culprit, it traces back to the shared chase. We check the flame pattern and the venting together so the fix actually holds.

Trusted Brands We Service in Flatbush
We work with professional-grade product lines, including DuraFlex, HeatShield, Gelco, and Olympia Chimney. We name the brands we install because materials matter as much as labor, and HeatShield in particular lets us resurface a damaged liner with a ceramic restoration system rather than tearing out and starting over. That’s a repair-grade solution most sweep-only services don’t offer at all. We don’t claim to stock parts; what we do is get the right component for your chimney and turn the repair around without sending you to a second contractor. One specialist for the full chimney: cleaning, inspection, repair, and weatherproofing.
Common Fireplace Repair Problems We See in Flatbush Homes
- Backdrafting between units. When a parlor-floor gas fireplace and a basement boiler share one brick chase, one appliance can steal the other’s draft. The symptom is a fireplace that smokes or a pilot that won’t hold, and the fix starts with checking the whole stack.
- Seized or missing dampers. In pre-war flues built for coal, dampers were often thin and are now frozen or gone. That leaves an unlined, parged firebox open to humid summer air and driven rain.
- Spalling mortar and cracked clay tiles. Flatbush’s damp winters and humid summers push moisture into porous brick, and the freeze-thaw cycles plus nor’easter rain finish the job. A good share of this only shows up after a Level 2 inspection, and it forces relining before any insert is safe.
- Deteriorated crowns and flashing. The same weather that punishes the brick also beats up chimney crowns and flashing on these 80- to 110-year-old chimneys. A cracked crown is a slow leak into the firebox below.
See the difference
Before
After
Before
After
Before
AfterPricing for Fireplace Repair in Flatbush, NY
Here’s what fireplace repair typically runs in Flatbush. A damper repair or replacement usually lands around $175 to $400. Firebox repair, including rebuilding mortar and firebrick, typically runs $450 to $1,200. Gas fireplace diagnostics and pilot light or thermocouple repair generally fall in the $150 to $350 range. Insert service, including a liner check and any relining with HeatShield or DuraFlex, runs roughly $800 to $2,500 depending on flue length and condition. These are estimates, not quotes; the written estimate you get after inspection sets the final price. What moves the number most is whether the problem is confined to the firebox or runs up the shared chase. The estimate is free, and we’ll tell you when a repair can safely wait.
We Also Serve Cities Near Flatbush
We also work in Kensington, Flatlands, Midwood, and Borough Park. The housing stock and the shared-chase problems aren’t so different from one neighborhood to the next, so Flatbush homeowners nearby tend to get the same approach. Call (855) 342-5978 to book an inspection.
Serving Flatbush, NY – Our Local Coverage Area
We serve Flatbush and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fireplace Repair in Flatbush
Often, yes. In Flatbush’s converted two- and three-family row houses, a parlor-floor gas fireplace frequently vents into the same shared brick chase as a basement boiler, and both appliances can end up fighting over the same draft. That’s why a repair on one unit’s fireplace means checking the whole stack for backdrafting and abandoned oil or coal connections. Call (855) 342-5978 for an exact quote, and estimates are free.
It can usually be repaired, but seized or rusted-out dampers in Flatbush’s pre-war flues often need replacing rather than freeing up. A damper that’s stuck open lets humid summer air and rain into an unlined firebox, which accelerates the damage you’re trying to avoid. We check the surrounding masonry while we’re in there. Call (855) 342-5978 to book an inspection.
Flatbush’s damp winters and humid summers push moisture into porous brick, and the freeze-thaw cycle plus nor’easter rain breaks down mortar joints over time. Once the firebox mortar crumbles, it needs rebuilding with proper refractory materials before any gas or wood appliance is safe. Call (855) 342-5978 for an exact quote, and estimates are free.
In most older Flatbush chimneys, yes. Many flues here were built unlined or with parged brick for coal and oil, and an insert dropped into one without a proper liner creates creosote and moisture problems. We confirm the liner before anything goes in, and reline with DuraFlex or resurface with HeatShield where needed. Call (855) 342-5978 to schedule.
A Level 1 is a visual check of the accessible portions; a Level 2 goes further with a camera inspection of the full flue, which is what shared Flatbush chases usually require. On a converted row house where several units vent into one stack, the camera is the only way to see backdrafting, abandoned connections, and cracked clay tiles. Call (855) 342-5978 for an exact quote.
Book Your Flatbush Fireplace Repair
Most Flatbush fireplace repairs come down to the stack, not the firebox, and that’s exactly what we check first. The estimate is free, the sweep price is agreed before booking, and the camera inspection and photo report are included so you see what we see. Call (855) 342-5978. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Gravesend.