Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cleaning Cost in Midwood?
Chimney cleaning in Midwood typically runs $175 to $350 for a standard sweep of a wood-burning fireplace flue. Add a Level 1 inspection and most homeowners land between $225 and $425 once the technician has checked the firebox, damper, smoke chamber and cap. Heavier creosote, a third-story roofline on a Victorian-era house in the neighborhood, or a flue that hasn’t been touched in years pushes the total toward the top of that range.
Those figures are estimates for the Midwood market. The written estimate you get after we look at the flue is what sets the final price, and that estimate is free. Call (855) 342-5978. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Chimney Cleaning Cost Breakdown (2026)
Chimney work isn’t one price. It’s a series of tasks, and the number you see on an invoice reflects which of them your chimney actually needs. Here’s how the line items tend to fall out across Midwood and the surrounding Brooklyn neighborhoods in 2026.
| Service | Typical Estimated Range | What’s Included |
|---|---|---|
| Standard sweep (wood-burning fireplace) | $175 – $350 | Rod-and-brush cleaning of the flue, firebox vacuum, creosote removal |
| Sweep plus Level 1 inspection | $225 – $425 | Sweep plus visual check of firebox, damper, smoke chamber, cap and accessible flue |
| Heavy creosote removal (Stage 2 or 3) | $350 – $650 | Chemical treatment or rotary cleaning where glazed creosote has built up |
| Sweep for a wood-burning stove insert | $225 – $400 | Baffle and liner access, flue cleaning, gasket check |
| Chimney cap installation | $175 – $450 | Stainless or copper cap sized to the flue, with mounting |
| Crown repair or rebuild | $400 – $1,200 | Crack sealing or full crown replacement with proper slope |
| HeatShield liner resurfacing | $1,400 – $3,500 | Ceramic resurfacing of a damaged clay liner, sized by flue length and condition |
| DuraFlex stainless liner installation | $2,200 – $5,500 | New insulated stainless liner, sized by height, diameter and appliance type |
The sweep itself is rarely the expensive part. What moves the number is what we find once the brushes are in the flue. A two-story brick chimney with a straight flue and a clean cap is a straightforward job. A chimney that shares a party wall with a neighbor’s flue, has a damper seized from disuse, or holds glazed creosote from a few seasons of green wood takes more time, more tools and more care. Midwood’s housing stock runs heavily toward early-20th-century brick construction, and plenty of those chimneys have been through decades of use without a proper sweep. We name the brands we install, DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco and Copperfield, because materials matter as much as labor, and we’ll tell you plainly if what you need is a cleaning or a repair.
What Affects Chimney Cleaning Pricing in Midwood
Two chimneys of the same height on the same block can price differently. Here’s what’s actually driving the number when we put an estimate together.
- Creosote stage. Stage 1 creosote is soot and flaky residue that brushes off easily. Stage 2 is crustier and takes more passes. Stage 3 is glazed, hardened and needs chemical treatment or rotary cleaning before a brush will touch it. The jump from Stage 1 to Stage 3 can double a cleaning estimate, and Stage 3 is also a real fire hazard worth addressing promptly.
- Chimney height and roof access. A chimney that terminates just above the roofline of a two-story Midwood house is one thing. A taller run on a three-story brick building, or one tucked behind a parapet, takes longer to set up safely and adds to the labor side of the estimate.
- Flue liner type and condition. A clay-tile liner in good shape sweeps cleanly. A cracked or spalling liner means the sweep has to be done more carefully and often points toward HeatShield resurfacing or a new DuraFlex liner. That’s a separate line item, and we’ll show you why it’s recommended before you decide.
- Appliance type. A traditional open fireplace is the simplest sweep. A wood-burning stove insert adds baffle removal, gasket inspection and often a tighter flue. A pellet or gas appliance has its own service routine and pricing.
- Blockages and animal nests. Birds, squirrels and raccoons get into uncapped flues, and Midwood’s tree canopy gives them plenty of launching points. Clearing a nest or a fallen brick adds labor and usually makes the case for a cap on the same visit.
- Access to the firebox and damper. Furniture in front of the hearth, a damper that won’t open, or a firebox crowded with a grate and andirons all add setup time. None of it is unusual, but it’s part of the estimate.
Our technicians have up to 15 years of experience, and that experience matters most on the diagnostic side. An inspection backed by real repair experience, not a checklist, is what catches a hairline crack in the smoke chamber before it becomes a liner replacement. As a chimney and fireplace specialist, we see the repair side of these systems every week, and that shapes how we read what a sweep turns up.
How to Save on Chimney Cleaning in Midwood
There’s no secret discount to chase here. The savings come from timing and from closing the loop between cleaning and weatherproofing so you’re not paying for the same access twice.
- Sweep before the heating season, not during it. Booking a cleaning in late summer or early fall means the flue is clear before the first fire, and you avoid the crunch when every fireplace in Brooklyn is suddenly in use. A clean flue also burns more efficiently, which shows up in how much wood you go through over a winter.
- Combine the sweep with a cap or crown. If your chimney has no cap, every sweep is a chance to fix that. A cap keeps rain, birds and debris out and reduces how fast creosote and soot accumulate. Doing the cap during the same visit means one setup, not two.
- Stay on an annual rhythm. A chimney swept once a year, or after every cord of wood burned, never reaches Stage 3 creosote. The homeowner who calls every fall spends less per decade than the one who calls after five years of buildup.
- Burn seasoned wood. Dry, well-seasoned hardwood produces less creosote than green or soft wood. It’s the cheapest thing you can do to keep cleaning costs down, and it doesn’t require a service call.
- Get the estimate in writing before work starts. Any reputable sweep will tell you the price before the brushes come out. We give free estimates and put the number in writing, so there’s no surprise on the invoice.
For a fuller picture of what a sweep involves and when to schedule one, our chimney sweep gravesend page walks through the process. If you want to know how Midwood compares to neighboring markets, the pricing on our chimney cleaning in Brooklyn page gives you a borough-wide baseline, and the chimney cleaning cost guide breaks down national ranges against local ones. Homeowners comparing service across the area also check our chimney cleaning in Sheepshead Bay and chimney cleaning in Flatbush pages, which follow the same pricing structure.
When a Cleaning Turns Into a Repair
A sweep sometimes ends with a recommendation you didn’t expect. That’s not upselling, it’s what the inspection turns up. The most common findings in Midwood’s older brick chimneys are cracked clay liner tiles, a crown with a hairline crack that lets water in, a missing or rusted-out cap, and a damper that no longer seals. Each of those has a price, and each of them is cheaper to fix now than after a water-damaged flue or a chimney fire.
HeatShield liner resurfacing is the repair-grade solution we reach for most often on a clay liner that’s cracked but structurally sound. It’s a ceramic resurfacing system, not a temporary patch, and most sweep-only companies don’t offer it because it takes a different skill set. When a liner is beyond resurfacing, a DuraFlex stainless liner is the durable answer. Both are products built for the trade, and both are part of the full chimney lifecycle we handle under one company: sweep, inspect, cap, crown, repair and fireplace restoration. No handoff to a second contractor.
Water damage is the quiet cost driver in this part of Brooklyn. Midwood gets its share of freeze-thaw cycles through the winter, and water that gets into a cracked crown or an uncapped flue expands when it freezes. That’s how a small crown crack becomes a rebuild, and how a spalled brick becomes a liner problem. Caps, crowns and liners done right the first time, with parts built for the trade, are the weatherproofing steps that keep a cleaning from turning into a rebuild.
If you’re also dealing with a fireplace that smokes or a damper that won’t move, our fireplace repair page covers what’s involved. For the roof-level side, the chimney cap installation and chimney crown repair pages explain what we look for and how the work is done. And if you’ve been told your liner needs work, the chimney liner repair page and the HeatShield liner resurfacing page go deeper on the options and pricing. Homeowners in nearby Kensington and Midwood use those pages to compare before they call.
Why a Chimney Specialist Prices Differently
A general handyman will sweep a flue for less. What that price usually doesn’t include is a real inspection, and it rarely comes with the ability to fix what the sweep turns up. When we clean a Midwood chimney, the person holding the brush has also installed liners, rebuilt crowns and diagnosed draft problems. That’s the difference between a checklist and an informed read of your system, and it’s the reason our estimates sometimes recommend a repair a cheaper sweep would have missed.
We work with a curated roster of professional-grade brands because the parts that go into a chimney matter. DuraFlex for stainless liners, HeatShield for ceramic resurfacing, Gelco, Olympia Chimney, Famco and Copperfield for the components that make up a complete system. These are names used by certified chimney institutes, not big-box substitutes. A chimney-only focus means we’re not guessing at what a flue repair should cost because it’s a sideline. It’s the whole job.
Every visit starts with an estimate, and the estimate is free. The price is set per job, in writing, before any work begins. If the sweep turns up something that changes the scope, we’ll show you what we found and what the options are. No surprise line items.
FAQs – Chimney Cleaning Cost in Midwood
How much does a chimney sweep cost in Midwood?
A standard chimney sweep in Midwood runs $175 to $350, and a sweep bundled with a Level 1 inspection typically falls between $225 and $425. The final number depends on creosote buildup, flue condition and access. Call (855) 342-5978 for a free estimate, and we’ll give you the exact figure for your chimney.
Is chimney cleaning worth the money?
Yes, at $175 to $350 for a standard sweep, it’s the cheapest protection you can buy against a chimney fire. Glazed Stage 3 creosote is a genuine fire hazard, and a cleaning that catches it early costs far less than the repair work a fire would require. Call (855) 342-5978 to book a sweep before the heating season.
How often should a Midwood chimney be cleaned?
Once a year is the standard for a fireplace in regular use, or after every cord of wood burned, so most homeowners budget $175 to $350 annually. A chimney that’s swept on that rhythm almost never reaches the heavy-creosote cleaning that runs $350 to $650. Call (855) 342-5978 to set up an annual sweep.
Can you come today for a chimney cleaning?
Often yes, with same-day service available and fast dispatch from 7am to 7pm, Sunday through Friday. Pricing for same-day work is the same as any other visit; the written estimate sets the price. Call (855) 342-5978. We answer 24/7.
What does it cost if the sweep turns up a liner problem?
HeatShield liner resurfacing typically runs $1,400 to $3,500 and a new DuraFlex stainless liner runs $2,200 to $5,500, both sized by flue length and condition. Those are repairs, not cleaning, and they’re quoted separately after we’ve seen the liner. Call (855) 342-5978 for a free estimate if you’ve been told your liner needs work.
Get a Free Chimney Cleaning Estimate in Midwood
Every chimney is different, and the only way to know your actual price is to have someone look at the flue. We give free estimates, put the number in writing, and tell you plainly whether you need a cleaning or something more. Our technicians have up to 15 years of experience, and every job is priced per job by the written estimate. Call (855) 342-5978. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Midwood market as of 2026. Chimney Sweep Gravesend offers free estimates – call (855) 342-5978.
Written by the team at Chimney Sweep Gravesend.
What Our Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Yolanda Dawson"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Renee Brooks"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Daniela Martinez