Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Gravesend?
Chimney repair in Gravesend typically runs $185 to $6,500, with most common repairs landing between $300 and $1,400. A crown reseal or masonry patch sits at the low end, while a relined flue or a chimney that needs rebuilding near the roofline pushes into the thousands. Your written estimate sets the final price, and we give that estimate for free.
Key Takeaways
- Most Gravesend chimney repairs cost $300-$1,400; full relining or rebuild work reaches $6,500.
- The single biggest price driver is liner condition, not the cap or crown you can see from the yard.
- Brick chimneys in Brooklyn’s older housing stock often need masonry work before any liner decision.
- Free estimates and upfront pricing mean you know the number before we start.
Chimney Repair Cost Breakdown (2026)
Here’s how the line items shake out for a typical Gravesend home with an active fireplace or wood stove. These are estimated ranges for the local market, not exact quotes. The written estimate is what you pay.
| Repair | Typical Cost Range | What It Covers |
|---|---|---|
| Chimney cap (stainless, with mesh) | $180-$450 | A single-flue cap sized to your flue, installed and sealed |
| Crown repair or reseal | $350-$900 | Patching cracks or a full crown rebuild with proper pitch and overhang |
| Flue tile replacement (single) | $400-$1,200 | Removing a cracked tile and setting a new one |
| HeatShield liner resurfacing | $1,200-$3,200 | Ceramic resurfacing of a damaged or pitted flue to restore the liner surface |
| Stainless liner (DuraFlex or Olympia Chimney) | $1,800-$4,500 | A full stainless liner installed, insulated, and tied to the appliance |
| Masonry repair (tuckpointing, brick replacement) | $500-$2,500 | Repointing joints and replacing spalled brick in the stack or at the roofline |
| Chimney rebuild (partial or full) | $2,500-$6,500 | Rebuilding damaged masonry sections back to a sound, capped top |
| Fireplace repair (damper, firebox, smoke chamber) | $250-$1,800 | Damper replacement, firebox repointing, smoke chamber parging |
The cap and crown are cheap relative to everything above them, and skipping them is what drives a lot of the expensive work. A failed crown lets water into the stack, and water is what moves a $400 repair toward a $2,500 masonry job. When we’re already on the roof for a chimney repair, we check the crown and cap because a single visit can close both problems. Most sweep-only companies don’t handle weatherproofing at all, which is one reason we work the full scope: sweep, inspect, cap, crown, and repair under one roof.
What Affects Chimney Repair Pricing in Gravesend
Gravesend reads like a lot of southern Brooklyn: brick rowhouses and semi-detached homes, many built between the 1920s and 1950s, with chimneys that were laid for coal or oil heat and later converted to gas or wood. That history shapes what a repair actually costs.
- Liner condition first. A flue that passed a visual check ten years ago may show pitting or cracked joints on closer inspection. HeatShield resurfacing restores a damaged flue without a full tear-out, and that’s usually the cost swing between a $1,200 job and a $4,000 one.
- The age of the brickwork. Older Gravesend stacks often show spalling brick at the roofline where years of freeze-thaw cycles have done their work. Tuckpointing and brick replacement are priced by area and access, so the more of the stack that’s failed, the higher the line item.
- Access and roofline height. A chimney that sits close to the roof edge or next to a flat roof is easier to reach than one at the peak of a steep slope. Access affects labor hours, and labor is the biggest part of any repair bill.
- Flue size and appliance type. A wood stove needs a liner sized to its output, and a fireplace needs the right chimney height above the roofline to draft correctly. The wrong liner is more expensive to undo than to install right the first time.
- Whether the cap and crown are already gone. A missing cap or a cracked crown lets water in, and water damage is what turns a small repair into a rebuild. If your chimney has been open to the weather for a few winters, expect masonry line items on the estimate.
- What the inspection finds. A Level 1 check covers what’s visible; a Level 2 inspection with a camera may turn up a cracked tile or a compromised smoke chamber that wasn’t obvious. Our technicians have up to 15 years of experience, and we do the inspection and the repair, so the recommendation comes from someone who’s going to do the work, not from a checklist.
How to Save on Chimney Repair
The cheapest chimney repair is the one you catch early. The physics works against you: a small crack in the crown becomes a spalled brick, a missing cap becomes a water-damaged flue, and by the time you’re calling us the price has climbed. Here’s what actually helps.
- Get the cap and crown done together. We install them in the same visit as the cleaning or repair, and a stainless cap with mesh runs $180-$450 while the crown work is $350-$900. Bundling them into one appointment is more practical than a return trip.
- Ask about HeatShield before you assume you need a full liner. A ceramic resurfacing system can restore a damaged flue at a fraction of the cost of a full stainless install. Not every flue qualifies, but it’s worth asking.
- Handle the small stuff now. A $250 damper or firebox repointing done today beats a smoke chamber rebuild in two years.
- Get an inspection that comes with a real opinion. If the person inspecting can’t explain what a repair costs or why, get a second look. Ours can, because we do the work.
- Keep water off the masonry. That means a sound cap, a pitched crown, and no open flue when it’s not in use.
Our inspections and estimates are free, and there’s no fee to call and get a number. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
When to Repair vs. Replace
As a rule: repair if the liner is intact or resurfaceable and the masonry is sound beneath any surface damage. If the flue is cracked through, the smoke chamber is compromised, or the masonry is failing across more than a third of the stack, replacement or rebuild is the honest answer. A HeatShield resurfacing in the $1,200-$3,200 range is a repair-grade fix when the flue meets the criteria; a full stainless liner install ($1,800-$4,500) is the right call when the flue is too far gone for resurfacing. We’ll tell you which one the inspection points to, and we’ll show you why.
We work with professional-grade brands: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. These are the materials used in the trade, not big-box substitutes. That matters at pricing time because the number you see reflects parts built to last, and the wrong liner or cap is a repair you do twice.
Same-Day Repair and What Happens When You Call
When you call, we book you for a diagnostic visit. A technician comes out, inspects the chimney, and gives you a written estimate for whatever needs doing. Fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday. The estimate is free, and you decide whether to book the repair. Small repairs like a cap or a damper replacement are often same-day work if the visit falls early enough in the day.
For anything that’s genuinely dangerous – a cracked flue letting carbon monoxide back into the house, a compromised masonry stack that could fail, or a damaged firebox – we tell you plainly and mark it for immediate attention. We don’t hand out step-by-step instructions for those fixes; that’s work for a trained professional on the roof, not a homeowner on a ladder.
Why a Chimney Specialist Instead of a General Handyman
Chimneys are a narrow trade. A handyman can patch a crack in the crown, but the question that determines the price of the repair is whether the flue inside is safe, and that’s a diagnostic judgment, not a patching job. We specialize in chimneys and fireplaces, not a sideline within a broader home-maintenance operation. That shows up in the estimate: an inspection informed by hands-on repair experience rather than a form filled out before the work begins. You can read more about how we approach the full scope on our Chimney Sweep Gravesend page.
Caps, crowns, and liners are the three things that decide whether a chimney stays sound for years or starts failing from the top down. We install and service all three, in the trade-grade brands above, so the weatherproofing doesn’t get handed off to a second contractor.
FAQs – Chimney Repair Cost
How much does chimney repair cost in Gravesend?
Most chimney repairs in Gravesend cost between $300 and $1,400, with the average closer to $800 for a crown, cap, or masonry repair. Full flue relining runs $1,800-$4,500, and a partial rebuild reaches $6,500. Call (855) 342-5978 for an exact quote. Estimates are free.
Is it cheaper to repair or replace a chimney flue?
Repair is almost always cheaper when the flue qualifies: HeatShield resurfacing at $1,200-$3,200 versus a full stainless liner at $1,800-$4,500. If the flue is cracked through or the smoke chamber is compromised, replacement is the only safe answer. Call (855) 342-5978 and we’ll tell you which one the inspection points to.
How much does a chimney cap or crown cost in Gravesend?
A stainless cap with mesh runs $180-$450, and crown repair or reseal runs $350-$900. Doing both in one visit is usually the smarter move. Call (855) 342-5978. Estimates are free.
Can you fix my chimney the same day?
Often yes for smaller jobs like a cap, damper, or minor masonry repair, if the diagnostic visit falls early enough in the day. Larger liner or rebuild work needs a scheduled return. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Call (855) 342-5978.
Do you charge for the estimate?
No. Our estimates are free, and the price is set per job by the written estimate you receive after the inspection. There’s no trip charge to call and get a number. Call (855) 342-5978. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why does my repair cost more than my neighbor’s?
Because the flue condition is different. Two chimneys on the same block can carry very different liner diagnoses depending on how they were heated and how long they sat without a cap. The estimate reflects what’s actually inside your chimney, not what’s typical on the street.
If your chimney needs work and you want a straight number before anyone climbs on the roof, call (855) 342-5978. We answer 24/7, and we’ll book a diagnostic visit with fast dispatch from 7am to 7pm, Sunday through Friday. The estimate is free, the pricing is upfront, and the work comes with a satisfaction guarantee.
Pricing reflects the Gravesend market as of 2026. Chimney Sweep Gravesend offers free estimates – call (855) 342-5978.
Written by the team at Chimney Sweep Gravesend.
What Our Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Yolanda Dawson"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Renee Brooks"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Daniela Martinez