Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Repair for Gravesend Homeowners
Water gets into Gravesend masonry the same way it gets into everything else here: quietly, from the top down. A hairline crack in the crown, a flashing joint that pulled loose, a few bricks that went soft after a freeze – and by the time you notice a stain on the ceiling or a crust of white powder on the bricks, the mortar behind it has been crumbling for a season or two. We repair chimneys for a living, and only chimneys, so we know exactly where to look. Our technicians have up to 15 years of experience, we name the brands we install, and an inspection always comes with camera evidence you can see for yourself before you approve any work. Repairs are usually booked the same day you call, with fast dispatch from 7am to 7pm, Sunday through Friday. Call (855) 342-5978.
What Our Chimney Repair Service Includes
Repair work on a chimney is mostly one problem wearing different masks: moisture finding a way in, freezing, expanding, and prying the masonry apart from the inside. Here’s what each piece of the job actually involves and when it’s the right call.
Mortar Repointing
Repointing means cutting out the old, crumbly mortar between bricks and replacing it with fresh mortar that bonds properly to the masonry. You need it when the joints have receded, gone sandy, or started dropping grit down the face of the chimney. We rake the joints to a proper depth rather than smearing new mortar over the surface, which is a shortcut that fails within a season or two. In Gravesend’s freeze-and-thaw winters, a joint that’s left open lets water sit and split the brick beside it.

Spalling Brick Repair
Spalling is when the face of a brick flakes, peels, or pops off, usually after water soaks in and freezes behind it. It shows up as broken brick faces, piles of chips at the base, and a chimney that looks pitted from the street. We replace the spalled units with matching brick and correct the moisture problem that caused them, because swapping bricks without fixing the water source just restarts the clock. This is common on Gravesend chimneys that face the prevailing weather on an exposed roofline.

Chimney Waterproofing
Waterproofing is a breathable sealer applied to the exterior masonry, and it’s the single best defense against the freeze-thaw damage that drives most repair calls here. You need it when the brick pulls in water readily or after any repointing or brick replacement, since fresh masonry should be protected once it cures. We use a vapor-permeable product so moisture already inside the chimney can still escape – a film-forming sealer traps it and makes spalling worse.

Flashing Repair
Flashing is the metal where the chimney meets the roof, and it’s the most common source of leaks that homeowners blame on the chimney itself. When the sealant fails, the flashing lifts, or the metal corrodes, water runs straight down the outside of the flue and into the house. We reseal, re-set, or rebuild the flashing job with proper step and counter-flashing rather than a bead of caulk over a gap that needs metal.
Chimney Rebuilding
Rebuilding is for chimneys where the damage goes deeper than the surface – where bricks are loose through the thickness of the wall, the stack is leaning, or an old chase was never built to last. We tear down to sound masonry and rebuild the stack with new brick and proper bond, matching the existing chimney as closely as we can. It’s the honest answer when repointing would only buy a few years on a structure that needs replacing.
Tuckpointing
Tuckpointing is a finer, more precise version of repointing, used where the joint profile or color needs to match the original masonry closely. It’s the right choice on older Gravesend homes where the chimney is a visible part of the facade and a sloppy mortar job would stand out. We match the joint width and finish so the repair reads as part of the wall, not a patch over it.
One company handles the sweep, the inspection, the cap and crown, the masonry repair, and the fireplace itself. You can see the full scope on our Chimney Sweep Gravesend page, and if you’re comparing options across the area, our chimney repair page for Bensonhurst covers the same process.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Repair
We work with a set of professional-grade product lines you won’t find in a big-box aisle, and we name them because materials matter as much as labor. HeatShield is the ceramic resurfacing system we use for liner repair – it restores a cracked or pitted flue from the inside without a full tear-out, and it’s a repair-grade solution most sweep-only companies simply don’t carry. We also install and service DuraFlex stainless liners, which we size and fit to the actual flue rather than forcing a one-size product into it.
On the cap and crown side, Copperfield and Gelco are the products we reach for, because a cap is only as good as the metal and the fit, and a crown is only as good as the mix that goes into it. Each of these brands has its own wear points and its own way of failing, and we’ve seen enough of them to know where to look first. Whether you have HeatShield, DuraFlex, Copperfield, Gelco, or any other make on your chimney, we can help.
Signs You Need Chimney Repair Right Now
Some chimney damage can wait a season. Some can’t. These are the signals that mean it’s time to stop putting it off and get someone on the roof.
- Crumbling or receding mortar joints. If the mortar between the bricks is sandy, recessed, or flaking off, the joints are no longer holding the brick tightly. Left alone, that leads to loose bricks and eventually a rebuild instead of a repointing job.
- Flaking brick faces or chips at the base. Spalling brick is a structural warning, not just cosmetic, because the brick is losing its protective face. It usually means water has been getting in and freezing, so the source needs fixing at the same time.
- Water stains on the ceiling or chimney breast. A stain on the inside of the house means water is already past the masonry and into the structure. The likely culprits are flashing, the crown, or the cap, and the sooner it’s traced the less gets wet behind it.
- A leaning or visibly tilted stack. A chimney that leans is a serious sign, because it points to a failing foundation or a stack that’s pulling apart at the joints. This one is not a wait-and-see item; it needs eyes on it.
- White, crusty powder on the exterior brick. That powder is efflorescence, and it means moisture is moving through the masonry and evaporating on the surface. It’s a symptom worth chasing, because it’s often the first visible sign of a waterproofing problem.
Our Chimney Repair Process – Step by Step
We keep the process simple and transparent, because the biggest worry with chimney work is being told you need thousands of dollars of repair you can’t verify. Here’s how a job actually goes.
- 1
Book the visit and agree the schedule. When you call, we talk through what you’re seeing, book a time, and confirm up front what the visit covers. No surprises on arrival, and no fee you didn’t agree to.
- 2
Inspect the full chimney, not just the obvious spot. A diagnostic inspection looks at the crown, cap, flashing, masonry joints, and – where the fireplace is active – the flue interior with a camera. Because we do the repair work ourselves, the inspection is informed by hands-on experience, not a checklist filled out by a generalist.
- 3
Show you the evidence. You see the camera footage and the photos of the problem areas before anyone recommends a repair. If a piece of work can safely wait, we say so plainly, and nothing gets recommended that the evidence doesn’t support.
- 4
Give you a written estimate per job. The estimate breaks out the work item by item – repointing, new flashing, a crown rebuild – so you can see what each piece costs. The written estimate sets the final price, and the price is per job, not a fee that swings up once work starts.
- 5
Do the work and check it with you. We complete the repair and walk the finished job with you so you can see the mortar lines, the flashing, and the waterproofing for yourself. Cap and crown work can be added to the same visit if the inspection turns up a gap.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Gravesend?
There’s no single number, because a chimney repair is priced per job – but the ranges tend to fall into recognizable bands. A typical mortar repointing on a Gravesend chimney runs roughly $500 to $1,800 depending on how much of the face needs raking out and how high the stack sits. Flashing repair usually falls in the $300 to $800 range, while a full chimney rebuild on a badly failing stack is a larger project that we price only after seeing the extent of the damage. Waterproofing is often the smallest line on the estimate, and it’s the one that protects the money you spend on everything else.
What affects the price most is access – a steep roof or a tall stack takes more setup – plus how much hidden damage the inspection turns up. The way to avoid overpaying is to make sure the estimate is itemized and that no repair gets recommended without camera evidence you’ve seen. Our free estimate includes the inspection findings, the photo report, and a clear written price per job. If a repair can wait a season, we’ll tell you that instead of pricing unnecessary work.
Chimney Repair Near Gravesend – Our Service Area
We serve homeowners across the Gravesend area and into the surrounding neighborhoods, including Sheepshead Bay, Midwood, Brighton Beach, Dyker Heights, and Borough Park. Scheduling is straightforward: call and we book the next available opening, with fast dispatch from 7am to 7pm, Sunday through Friday. For neighboring communities, see our chimney repair page for Sheepshead Bay, and if your project spans both neighborhoods, one visit can cover both.
Serving Gravesend, NY – Our Local Coverage Area
We serve Gravesend and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Repair in Gravesend
Chimney repair is the work of restoring the structure and watertightness of a chimney, covering mortar repointing, spalling brick replacement, waterproofing, flashing repair, tuckpointing, and full rebuilding when the damage is deeper. It’s distinct from cleaning: cleaning removes creosote and soot from a working flue, while repair fixes masonry, metal, and the flue liner itself. Most Gravesend calls come down to moisture – water getting in, freezing, and forcing the masonry apart. A repair inspection tells you which of these apply to your chimney. Call (855) 342-5978 for a free estimate.
Most routine repair jobs finish in a single visit, while a full rebuild or a large repointing project can stretch over more than one. Flashing repair and waterproofing are usually quick; repointing depends on how much of the face needs raking and refilling; a rebuild is the longest. We give you the expected timeline with the written estimate so you know what to plan for. Call (855) 342-5978 and we’ll talk through your chimney’s specific situation.
Repointing typically runs about $500 to $1,800, flashing repair about $300 to $800, and a rebuild is priced after inspection because the scope varies so much. The written estimate sets the final price, and we itemize each piece of work so you can see where the money goes. Nothing gets recommended without camera evidence you’ve seen yourself. Call (855) 342-5978 for an exact quote – estimates are free.
Yes – HeatShield ceramic resurfacing and DuraFlex stainless liners are two of the product lines we work with regularly. HeatShield is a repair-grade liner restoration system, applied inside the flue to seal cracks and pits without a full tear-out, and it’s a solution most sweep-only companies don’t offer. DuraFlex liners we size and fit to the actual flue. Whether you have HeatShield, DuraFlex, Copperfield, Gelco, or another make, we can help. Call (855) 342-5978 to discuss your liner.
Same-day repair visits are often available when you call, and we book you into the next opening. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (855) 342-5978 and we’ll find you a time.
Yes – we stand behind the repairs we perform and walk the finished job with you so you can see the work firsthand. Our approach is to show you the camera evidence and photo report before any repair, so the guarantee covers work you understood and approved. If something isn’t right after the job, we come back and make it right. Call (855) 342-5978 with any questions about the work.
Clear access to the fireplace and the roofline is the main thing – move anything blocking the hearth, and make sure we can get to the chimney from the roof side. If you’ve noticed leaks or stains, note where and when they appear, since that helps trace the source. Tell us up front about any prior work on the chimney or liner, as that shapes how we approach the repair. Call (855) 342-5978 if you’re unsure what to do.
Schedule Your Chimney Repair Service in Gravesend Today
Don’t let a small masonry problem grow into a rebuild. Call (855) 342-5978 for a free estimate, a camera-backed inspection, and a written price per job before any work starts. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We’ll show you what’s wrong, tell you what can safely wait, and fix what can’t.
Written by the team at Chimney Sweep Gravesend.