Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Sheepshead Bay
If you live in Sheepshead Bay, you already know the bay does more than give the neighborhood its name. Wind comes off Coney Creek, rain drives sideways, and the crown on top of your chimney takes the worst of it. We’re Chimney Sweep Gravesend, and we handle cap and crown work for Sheepshead Bay homeowners whose brick stacks are older than most of the roofs around them. A cracked crown or a missing cap is cheap to fix now and expensive to leave. Call (855) 342-5978 and we’ll set up a free estimate.

Why Sheepshead Bay Homeowners Call Chimney Sweep Gravesend for Chimney Cap & Crown
Chimney Sweep Gravesend is a chimney-and-fireplace specialist, not a general handyman outfit that adds a cap when the schedule is slow. That focus matters here. Our technicians have up to 15 years of experience, and they’ve spent that time looking at the kind of aging brick stacks you find under Sheepshead Bay rooflines: unlined flues, clay-tile liners past their prime, mortar that crumbles when you touch it. We come to Sheepshead Bay for cap and crown work because it’s the part of the chimney most exposed to the weather, and it’s the part most sweep-only companies skip.
We name the brands we install, because materials matter as much as labor. That means Copperfield and DuraFlex components where they fit, and HeatShield’s ceramic resurfacing system when a liner needs repair rather than replacement. Plenty of companies will quote you a cap and never mention what it’s made of. We tell you, every time. It’s a small thing until you’re the one replacing a cheap cap three winters later.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Sheepshead Bay
Every cap and crown we quote comes with one rule: nothing gets recommended without camera evidence you can see for yourself. Photographs and footage of your own flue, on the spot, before any work is booked. You shouldn’t have to take anyone’s word that your crown is failing.
Cap Installation in Sheepshead Bay
A properly sized stainless cap keeps rain, birds, and raccoons out of your flue. On the wood-frame bungalows and Cape Cods south of Avenue U, an uncapped chimney is an open door, and raccoons find it. We size the cap to your actual flue, not a one-size-fits-all box store unit.
Cap Replacement in Sheepshead Bay
Salt-laden bay wind eats at galvanized caps, and the cheap mesh screens rust through first. If your cap is loose, rattling, or missing sections, replacement is usually a short job. We’ll show you what failed and why before quoting a new one.
Crown Repair in Sheepshead Bay
The crown is the concrete cap at the very top of the stack, and on a freestanding wood-frame house it’s often the only masonry holding the top course in place. When it cracks at the flue collar, water gets in and freeze-thaw does the rest. We repair crowns with proper slope and a drip edge so water sheds off instead of pooling.
Crown Coating in Sheepshead Bay
Not every crown needs to be rebuilt. A crown with surface spalling but a sound structure can often be cleaned, sealed, and coated to slow the erosion. We won’t coat a crown that’s too far gone, and we won’t tear out one that only needs a coating. The camera tells us which way to go.
Alongside those four we install Chimney Cap & Crown work across the full range: custom caps built to odd flue shapes, and multi-flue caps for chimneys serving more than one appliance. If you’re not sure which you need, that’s what the inspection is for.

Trusted Brands We Service in Sheepshead Bay
We work with a curated roster of professional-grade brands because a cap or crown is only as good as the materials under it. Copperfield and Olympia Chimney make caps and components built to last on a salt-exposed roofline. DuraFlex handles the liner side, and HeatShield is our choice when a clay-tile flue needs ceramic resurfacing rather than a full reline. Gelco and Famco round out the lineup for the hardware side. These are names used by certified chimney institutes, not big-box substitutes, and they hold up better against the wet, windy conditions Sheepshead Bay delivers. We’ll tell you which product fits your chimney and why.
Common Chimney Cap & Crown Problems We See in Sheepshead Bay Homes
- Salt wind pitting the crown face. Bay wind off Coney Creek carries salt and drives rain sideways against the crown, and the concrete face spalls faster than the brick below it. That’s a pattern you don’t see the same way a mile inland, where parapet walls and shared masonry shield the top course.
- Flat crowns with no drip edge. Plenty of the crowns on 1920s – 1950s houses were poured flat. Meltwater pools against the flue collar, then freeze-thaw cracks it open. A sloped, overhanging cast crown sheds water instead of holding it.
- Uncapped clay-tile flues on old boiler stacks. Many original liners have no cap, so raccoons and birds move in and mortar debris falls into the smoke chamber. Scratching in the chimney is usually a raccoon, and the nest comes out before anything else gets done.
- Original uninsulated liners carrying modern appliances. When a furnace or water heater was swapped out over the years, the flue behind it often wasn’t upgraded to match. We check that with the camera before quoting a cap, because a new cap on a failing flue doesn’t solve the real problem.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in Sheepshead Bay, NY
Here are typical ranges for cap and crown work in Sheepshead Bay. A standard stainless single-flue cap installation usually runs $250 – $500 installed, depending on flue size and cap style. A multi-flue cap for a chimney serving more than one appliance typically falls in the $550 – $950 range. Crown coating runs about $400 – $750, and full crown repair or recasting typically lands between $700 and $1,400, more when the crown has to be fully rebuilt. What moves the number: flue count, crown size, the condition of the masonry underneath, and whether the job needs access from a steeper roofline. Every estimate is free, and the written estimate sets the final price. Call (855) 342-5978 for yours.
We Also Serve Cities Near Sheepshead Bay
We cover the neighborhoods around Sheepshead Bay as well: Brighton Beach, Gravesend, Midwood, and Bergen Beach all get the same cap and crown work. If you’re just outside the neighborhood, say so when you call and we’ll confirm coverage. You can read more about how we serve Sheepshead Bay and the surrounding area on our city page.
Serving Sheepshead Bay, NY – Our Local Coverage Area
We serve Sheepshead Bay and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Sheepshead Bay
It can sometimes be patched or coated, but only if the crack is surface-level and the crown beneath it is sound. A crack that runs through the flue collar or lets water pool usually means the crown needs recasting, not patching. The camera footage and a close look at the crown face tell us which. We won’t quote a recast if a coating will hold. Call (855) 342-5978 for a free estimate.
Salt air and wind-driven rain off Coney Creek break down metal caps faster, and the constant moisture loosens the mortar around an uncapped flue. Inland, parapet walls and shared masonry shield the top course more. Near the bay, an uncapped flue is more exposed and more likely to host raccoons. A properly sized stainless cap is the first line of defense. Call (855) 342-5978 to size one for your chimney.
Yes. We don’t quote a cap on an old clay-tile flue without running the camera first, because a cap on a failing liner just hides the problem. The footage shows spalling tile, gaps at the joints, and debris sitting in the flue. You see it on the spot, before a number is quoted. Call (855) 342-5978 to book the inspection.
Usually a raccoon, sometimes birds, and a den of debris in a clay-tile flue that’s been open for years. The animal gets cleared out, the nest comes out, and we check the flue for damage before we cap it. On Sheepshead Bay’s 1920s – 1950s wood-frame houses this combination of salt-worn crown, uncapped flue, and raccoon intrusion turns up often. Call (855) 342-5978 and we’ll take a look.
Once a year. The bay climate does damage even with a light fire season: salt wind pitting the crown, wind-driven rain soaking the mortar, and freeze-thaw opening cracks that have nothing to do with how much wood you burn. The inspection catches crown and cap problems before they reach the flue. Call (855) 342-5978 to schedule one.
Book Your Sheepshead Bay Cap or Crown Estimate
Sheepshead Bay’s older brick stacks deserve a specialist who knows how salt air, Coney Creek wind, and 1920s – 1950s wood-frame construction wear down a crown, and who won’t quote work you can’t verify. Camera footage first. Written estimate second. Nothing gets recommended that you can’t see yourself, and we’ll tell you plainly when work can safely wait. Call (855) 342-5978 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Gravesend.