Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Sunset Park
Water stains on a ceiling near the party wall almost always trace back to the top of the chimney, not the roof deck. If you own a rowhouse or tenement flat in Sunset Park, a cracked crown or a missing cap can send rain straight down shared flues for months before you notice it indoors. We work on chimney cap and crown jobs throughout Sunset Park, from the three- and four-story brick blocks off Fifth Avenue to the attached rowhouses near the waterfront. Call (855) 342-5978 and we’ll set up a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Why Sunset Park Homeowners Call Chimney Sweep Gravesend for Chimney Cap & Crown
Most of the buildings we cap and crown in Sunset Park were built between roughly 1890 and 1930, and the chimneys show it. Original clay tile flues, mortar joints softened by decades of weather, and flat tar roofs where getting up top safely takes some planning. A cap and crown job here is rarely just swapping a part. It’s reading what the stack actually is before we recommend anything.
That’s why homeowners in Sunset Park keep our number in their contact list. We’re a chimney and fireplace specialist, not a generalist who adds a cap as a side job. Our technicians have up to 15 years of experience with these systems. We install and service products from brands like Famco, Copperfield, and DuraFlex because the material matters as much as the labor. When a cap rusts out in a few winters or a crown coating chalks away, it’s usually cheap material. We don’t use big-box substitutes.
Our inspections are informed by hands-on repair work, so when we tell you the crown is failing, we’ve also looked at what the water is doing behind the flashing. You get a straight read on the chimney, not a checklist.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Sunset Park
Cap Installation
A properly sized cap keeps rain, birds, and squirrels out of the flue while still letting smoke vent. On a Sunset Park rowhouse with a single serving flue, that’s straightforward. We measure the flue opening and set a stainless or copper cap that fits the actual crown footprint. We also confirm the flue is clear before capping, since an abandoned flue should be treated differently than an active one.
Cap Replacement
Old galvanized caps rust through, and the pinholes let water into clay tiles that were never relined. When we replace a cap in Sunset Park, we look at the whole stack first. If the old cap was too small for the crown, we set it right. If it slipped off the flue entirely in a nor’easter, we anchor the new one properly so the next storm doesn’t move it.
Crown Repair
The crown is the mortar slab at the very top of the chimney. When it cracks, water tracks into the masonry and down through the party wall. We repair crowns on Sunset Park buildings by removing the failed section, rebuilding the slope so it sheds water away from the flue, and sealing the joint where the crown meets the tile. Much of this damage comes from freeze-thaw winters and salt air off the waterfront, which accelerates decay on exposed brick.
Crown Coating
A coating is a protective layer for a crown that’s still structurally sound but has gone porous. It seals the surface so water runs off instead of soaking in and freezing. For Sunset Park homeowners whose crown hasn’t cracked through but shows spalling or surface wear, crown coating is often the sensible option, and we’ll say so when it is.
Because we handle the full Chimney Cap & Crown scope, the cap, crown, flashing, and flue all get looked at in one visit rather than handed off between trades.
Trusted Brands We Service in Sunset Park
We work with a focused roster of professional-grade product lines: DuraFlex for stainless liners, HeatShield for ceramic liner resurfacing, Copperfield and Famco for caps and related components. These are names recognized across the chimney trade, not products pulled off a hardware shelf. We don’t claim to stock parts locally or keep inventory at a warehouse. We specify the right material for the job and arrange it, which keeps the turnaround reasonable for Sunset Park homeowners while giving you the material quality that holds up in a coastal climate.

Common Chimney Cap & Crown Problems We See in Sunset Park Homes
- A single-flue cap on a shared multi-flue stack. Many Sunset Park rowhouses have one chimney stack serving several flues, including a neighbor’s. A cap sized for one flue leaves the others open to rain and animals. A multi-flue cap covers the whole crown footprint.
- Spalling brick and loose mortar crowns. Salt air from the nearby waterfront plus hard freeze-thaw cycles pit the brick and loosen the crown. Once the crown goes, water gets into the masonry.
- Missing or improper flashing on flat tar roofs. At the roofline of flat roofs, a cracked crown lets water track down into the party wall shared with the attached building. Flashing at the base of the stack needs to be checked alongside the crown.
- Abandoned flues that were never capped. Old coal chutes in basements sometimes mark a flue that was left open after the switch to gas. An uncapped abandoned flue is an open door for rain and wildlife.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in Sunset Park, NY
These are typical estimated ranges for Sunset Park. The written estimate sets the final price, and the estimate is free.
| Service | Typical Estimated Range |
|---|---|
| Standard single-flue cap installation | $225 – $475 |
| Multi-flue cap (shared stack) | $450 – $950 |
| Custom or copper cap | $600 – $1,400 |
| Crown coating | $250 – $550 |
| Partial crown repair | $300 – $650 |
| Full crown rebuild | $550 – $1,200 |
Cost shifts with access. A flat tar roof and a tight street can add time to a job, and a shared stack that needs the neighbor’s cooperation can stretch the schedule. We quote after we’ve seen the stack, and we tell you plainly when a crown can safely wait.
We Also Serve Cities Near Sunset Park
We also work on chimney caps and crowns in Borough Park, Kensington, Bay Ridge, and Dyker Heights. Each of these neighborhoods has similar attached brick housing and similar coastal wear on chimney tops, so the approach carries over. If you’re not sure whether your block is covered, call and we’ll tell you. We’re glad to serve homeowners across Sunset Park and the surrounding blocks.
Serving Sunset Park, NY – Our Local Coverage Area
We serve Sunset Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Sunset Park
Because a shared stack usually has more than one flue, and a single-flue cap only protects one opening. The rest stay exposed to rain and animals, including a neighbor’s unlined or abandoned flue. Correctly covering the whole crown footprint with a multi-flue cap protects everyone sharing that stack. Call (855) 342-5978 for an exact quote. Estimates are free.
Cracks that aren’t leaking can sometimes wait through the season, but the freeze-thaw cycle in Sunset Park widens them with every winter. A crack that’s dry today can open into the party wall by spring. We’ll tell you honestly whether a repair can be scheduled later or should be handled now, based on what we see. Call (855) 342-5978 to have it looked at.
Because on many blocks off Fifth Avenue, the chimney stack rises from an interior party wall shared between attached rowhouses. That means one crown and sometimes multiple flues are shared, and access or flue assignments have to be sorted with two owners. We map which flue serves which unit before recommending anything. Call (855) 342-5978 to walk through your building’s setup.
Crown coating seals a crown that’s structurally sound but porous; crown repair rebuilds a crown that has actually cracked or lost its slope. Coating protects. Repair restores. We recommend one or the other based on what we see, not on which costs more. Call (855) 342-5978 for a free estimate.
Yes, and it’s part of how we work. Before installing a cap or repairing a crown in Sunset Park, we check the flue and the crown together, because a cap over a damaged crown protects nothing. The inspection is what tells us whether a flue has degraded tile or mortar that needs attention. Call (855) 342-5978 to book an estimate.
Book Your Chimney Cap & Crown Estimate in Sunset Park
A cap and crown job on a Sunset Park rowhouse starts with a look at the whole stack: the crown, the flashing, the flues, and who they serve. Water staining near the party wall tells you something up top is failing, and it’s worth having a chimney specialist read it before the damage spreads into the masonry. We work with HeatShield for liner resurfacing and DuraFlex for stainless liners when the inspection calls for it, and we recommend nothing you can’t see camera evidence for. Call (855) 342-5978. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and the written estimate sets the final price.
Written by the team at Chimney Sweep Gravesend.