Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Inspection Across Bay Ridge
If your Bay Ridge home has a working fireplace or an old chimney stack you’ve never had looked at, an inspection is where you start. Chimney inspection in Bay Ridge typically runs $150 to $500 depending on the level, and most single-family and semi-detached homes here need a Level 2 with a camera. In the attached brick rows along Shore Road and the blocks off the Verrazzano approach, we read the stack, the shared party-wall flues and the roof access before we quote – because the chimney rules are the same across Bay Ridge, but the flues behind them rarely are. Call (855) 342-5978. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Why Bay Ridge Homeowners Call Chimney Sweep Gravesend for Chimney Inspection
Bay Ridge is dense, attached and mostly older brick, and that shapes how we inspect. Chimney inspection here means accounting for party-wall stacks: a single roof position can expose three or four neighboring flues, each someone else’s responsibility, and one neighbor’s cracked crown can leak into your liner. We serve Bay Ridge often enough to know the pattern of these semi-detached 1920s to 1950s stacks, the spalling on the street-facing masonry, and the summer AC retrofits that left flues unventilated for years. Our technicians have up to 15 years of experience, and every inspection comes with camera documentation and a photo report so you can see what we see. The written estimate sets the price, and it’s agreed before any work is booked.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Inspection Services in Bay Ridge
We cover inspections in tiers, and for most Bay Ridge homes the right tier is the one that reaches the camera.
Level 1 Inspection
A visual check of the accessible parts of the chimney and flue, done without a camera. It suits a Bay Ridge home that’s had a recent inspection or a chimney with a known, monitored condition. It won’t see inside an unlined party-wall flue, and in a row house that matters.
Level 2 Inspection
This is the standard in Bay Ridge attached housing. A Level 2 means a camera inside the flue, a roofline check of the crown and flashing, and documentation of what’s in the shared party-wall stack. It’s how we catch a neighbor’s appliance venting into what looks like your flue, or spalling that a simple brush-and-run sweep skips.
Level 3 Inspection
When a Level 2 camera view points to a hidden problem – a failed internal liner section, an inaccessible flue chamber, masonry that’s cracked behind the face – a Level 3 goes further, with access to concealed areas. We only recommend it when the camera or the roofline evidence says we need it, never as a default.
Camera Inspection
Our camera inspection walks the flue from the top down and records what it finds, so you have a photo report in hand. In Bay Ridge’s unlined and clay-lined stacks, the camera finds the soot lines, the cracked joints and the old coal-ash deposits that a visual check can’t reach.
Trusted Brands We Service in Bay Ridge
When an inspection turns up something that needs parts, we work with the professional-grade lines the trade actually uses: DuraFlex for stainless flex liners, HeatShield for ceramic liner resurfacing, Copperfield and Famco for related components. We don’t stock parts on a truck; what we specify comes from these manufacturers, matched to your flue and sized to the job. That means a repair recommendation from us is tied to a real material you can verify, not a substitute pulled off a shelf. The same brands appear on the written estimate, so you know exactly what goes into the stack.

Common Chimney Inspection Problems We See in Bay Ridge Homes
- Party-wall cross-contamination. A neighbor’s boiler or water heater tied into what looks like your flue is one of the most common finds in Bay Ridge’s attached brick rows. It causes draft problems that look like your chimney’s fault and aren’t, so the camera is what separates the two.
- Decades-old coal soot mistaken for creosote. Many of these stacks were built for coal and haven’t been properly swept since the fuel switch. Under a brush, that old soot can hide glazed deposits that need chemical removal, not a standard sweep.
- Spalling on the street-facing masonry. The humid, freeze-thaw coastal climate off the Narrows and Lower Bay works moisture into bay ridge masonry and pops it through winter. A cracked crown on one side of a shared stack lets water into both flues, so the roofline check is part of the inspection.
- Unlined flues left unused after AC retrofits. Summer cooling systems took over from many Bay Ridge fireplaces, leaving the flue uncapped and unventilated. That accelerates interior cracking and soot decomposition, and the camera is how we catch it before it becomes a repair.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Inspection in Bay Ridge, NY
Typical chimney inspection pricing in Bay Ridge runs $150 to $220 for a Level 1 visual, $220 to $350 for a Level 2 with camera, and $350 to $500 for a Level 3 where access to concealed areas is needed. A standalone camera inspection on its own flue is usually $180 to $280. What moves the number: whether the stack is shared, how easy the roof access is in a tight attached row, and whether the camera finds a liner that needs a closer look. Those prices are estimates – the written estimate sets the final price, and the estimate itself is free. If an inspection turns up a liner or crown repair that’s worth doing now, we’ll say so and show the evidence; if it can safely wait, we’ll say that too.
We Also Serve Cities Near Bay Ridge
The same attached-brick and party-wall conditions run into the neighborhoods around Bay Ridge, and we work those blocks as well. Alongside Bay Ridge we serve Dyker Heights, Borough Park, Sunset Park and Bensonhurst, so a homeowner on a shared stack doesn’t have to explain the layout twice. The inspection approach – camera, roofline, documentation – carries over directly.
Serving Bay Ridge, NY – Our Local Coverage Area
We serve Bay Ridge and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Inspection in Bay Ridge
Yes. Your side of a shared party-wall stack is your own flue, and we can inspect it from the roof without entering the neighbor’s home or asking their permission. What we can’t do is inspect their side, so we document what we can see and flag anything on the shared masonry – a cracked crown, for example – that both parties should know about. Call (855) 342-5978 for an exact quote; estimates are free.
Because an unused flue in a house this old has usually had a long, unseen life. The stack was built for coal, later tied to a furnace or water heater, then possibly left unventilated after an AC retrofit – and each of those stages leaves deposits or cracks a visual check never sees. A camera inspection documents the interior in a photo report you keep. Call (855) 342-5978 and we’ll book a Level 2.
First-degree creosote is flaky and brushes away; third-degree is glazed and hard, and a standard sweep won’t remove it. In Bay Ridge’s old coal-era stacks we often find both in the same flue, with the glazed deposits hiding under decades of old soot. That’s the reason the camera matters here. Call (855) 342-5978 for an inspection that tells you which you’re dealing with.
Spalling is a sign the masonry is taking on moisture, and on a street-facing stack in the freeze-thaw coastal climate it usually points to a crown or flashing problem above. That makes the roofline check a first priority, not an afterthought, since water getting into shared masonry can reach more than one flue. Call (855) 342-5978 for a free estimate on an inspection.
Yes, and in Bay Ridge’s party-wall chimneys it’s one of the most common hidden causes of draft trouble. A neighbor’s boiler or water heater tied into the same stack can vent into a flue that isn’t yours to control, so the smell, the draft and the soot you find can come from next door. The camera inspection documents the cross-contamination so each homeowner can address their side. Call (855) 342-5978.
Book a Chimney Inspection in Bay Ridge
If your Bay Ridge home has an old shared stack, a fireplace you’ve never had looked at, or a draft you can’t explain, the inspection is the first practical step. We come out with a camera, check the roofline, and hand you a photo report you can keep and share with a neighbor if the stack is shared. The estimate is free, the written estimate sets the price, and our chimney-only focus means the inspection is backed by hands-on repair experience. Call (855) 342-5978. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Gravesend.