Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
HeatShield Chimney Cleaning in Midwood, NY
We provide independent HeatShield service across Midwood, NY, and the one thing that makes our HeatShield work here different is what we find inside the chimneys: flues that vent basement boilers, not fireplaces, with clay tile that looks sound from the roof and reads very differently through a camera. Most Midwood chimneys were built to carry coal, then oil, then gas, and the ceramic lining work we do is usually decided at tile level, not curbside. Call Chimney Sweep Gravesend at (855) 342-5978 to book a sweep and camera inspection. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Midwood Residents Choose Us for HeatShield Service
HeatShield isn’t a product you learn from a brochure. The ceramic lining either bonds properly to a prepared, sound flue wall or it doesn’t, and knowing which of those you’re looking at comes from years of installing the material and coming back to inspect it. Our technicians have up to 15 years of experience with flue resurfacing, and that hands-on time is the whole basis for our judgment here.
We’re also chimney-only. We don’t do gutters, we don’t do roofs, and we don’t send a generalist to look at your flue and hand back a checklist. When our inspection says a ceramic lining will hold, that opinion is backed by the repair work we do afterward: crown repair, brick repointing, and the cap that keeps the whole job dry. We name the brands we work with – HeatShield for ceramic resurfacing, plus DuraFlex, Gelco, Olympia Chimney, Famco and Copperfield for liners, caps and components – because materials matter as much as labor. If a Midwood flue won’t take a lining, we say so and explain the alternative.
Scheduling is straightforward. Call (855) 342-5978 and we’ll book a visit. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common HeatShield Chimney Cleaning Problems We Solve in Midwood
- A restored lining failing at the top few inches. The crown is what sheds water off a brick chimney. When it cracks and pulls away from the flue, moisture re-enters right below the cap line, and a cast-in-place ceramic lining takes the worst of it. In Midwood’s freeze-thaw winters, water in that gap expands and contracts until the top of the restoration breaks up. We repair the crown before anything else.
- A HeatShield-resurfaced flue with no proper cap. We see restored flues that were never fitted with a cap sized to the chimney. Coastal New York weather then does what it does – rain and freeze-thaw crack the new surface from above. A cap is a small part of the job and the one that protects the rest of it.
- Sleeved boiler flues under acid attack after an oil-to-gas conversion. Plenty of Midwood houses were converted from oil to gas without anyone checking whether the flue was sized and vented for the new appliance. Gas exhaust condenses, and acidic condensate eats at a liner that was never asked to handle it.
- New lining bonded over tile that was already giving way. Spalled or delaminated clay tile under an older resurfacing job is a real failure, and it’s invisible from the roof. The lining holds to brick that’s failing, so both go. This is why we camera first and recommend second.
- Lining jobs with no documentation. If nobody ran a camera and kept the footage, the homeowner has no idea what condition the flue was in or what was actually done. We document the flue on camera so you can see the evidence yourself.
HeatShield Service in Midwood: What Local Conditions Mean for Your Equipment
Walking the blocks between Ocean Avenue and Coney Island Avenue, the pattern is consistent. Midwood is pre-war and mid-century brick semi-detached and detached houses, two- and three-family homes built from the 1920s through the 1950s, and many of them still have their original exterior brick chimneys. What those chimneys vent, though, often isn’t a fireplace at all. The give-away is a gas flue cap on the roof and no hearth upstairs – the chimney serves the basement boiler and water heater. Decades of oil-then-gas exhaust leave clay tile that looks intact from the roof but reads cracked and spalling at camera level, and the humid coastal climate plus freeze-thaw winters drive moisture into the brick and the crown. For HeatShield work specifically, that means the decision is rarely cosmetic. A ceramic lining can only be trusted when the tile behind it and the crown above it are sound, so a Midwood job usually starts with a Level 2 inspection and crown repair, not a brush.
HeatShield Models & Products We Service in Midwood
We work with the HeatShield HeatSeal ceramic chimney lining system, the cast-in-place resurfacing that rebuilds a clay tile flue from the inside. We handle CeCure Sleeve relining where a masonry flue has deteriorated past what resurfacing alone will fix, and joint-repair and tile-gap resurfacing compound for flues that only need the gaps closed. We also service HeatShield-restored flues serving gas-fired boiler and water-heater venting in converted oil-to-gas homes.
Choosing parts comes down to fit. The flue profile, the appliance, and the camera findings decide whether resurfacing is honest or whether a stainless sleeve is the right answer. We’re an independent HeatShield service provider, not affiliated with or authorized by the manufacturer, so our recommendation follows the flue, not a sales target.
See the difference
Before
After
Before
After
Before
AfterHeatShield Service Pricing in Midwood
Cost comes down to the condition of the flue, not the size of the house. A straightforward resurfacing on a sound, properly sized clay tile flue is one kind of job. A flue that needs crown repair, spalled brick repointed, or a stainless liner because the tile won’t hold is another, and it takes a camera run to know which you have.
- Sweep and inspection: quoted per job, set by the written estimate
- Level 2 camera inspection with a documented flue report
- Crown repair and brick repointing, priced by the extent of the damage
- HeatSeal ceramic resurfacing or CeCure Sleeve relining, priced by flue length and profile
- Chimney cap fitted to the actual flue opening
The estimate is free, and the price is set per job by the written estimate before any work is booked. Nothing is recommended without camera evidence you can look at yourself, and we’ll tell you plainly when work can safely wait. Call (855) 342-5978 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Serving Midwood, NY – Our Local Coverage Area
We serve Midwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – HeatShield Chimney Cleaning in Midwood
Yes, and in Midwood it’s usually the more important chimney in the building. A chimney with a gas flue cap and no hearth upstairs is venting the basement boiler or water heater, and that flue needs inspection for cracked tile and blocked or deteriorated venting. Gas appliance flues don’t build the heavy creosote a wood fireplace does, but they do carry moisture and acidic exhaust. Call (855) 342-5978 to book a Level 2 inspection and see what’s actually in there.
The camera decides, not the sales pitch. Ceramic resurfacing works when the existing clay tile is intact enough to bond to and the crown and brick above it are sound. When the tile is spalled, delaminated or the wrong size for the appliance, a stainless liner is the honest answer. We run a camera, show you the footage, and explain which case you’re in before anything is booked.
Because they’ve spent decades handling exhaust they were never lined for. Many Midwood houses were converted from oil to gas without correcting flue sizing or venting, and gas exhaust condenses into acidic moisture that works on clay tile and mortar joints. Add Midwood’s humid coastal climate and freeze-thaw winters driving water into aging brick, and the tile cracks from both sides. A camera run shows it clearly.
A Level 2 inspection is a camera run through the full flue with the findings documented, and it’s the right inspection after an appliance change, a conversion, or any lining or repair work. It covers the flue interior, the crown, the cap and the venting connections. We photograph what we find so you have a record of the flue’s condition. Call (855) 342-5978 to schedule one.
It matters more than almost anything else on the list, because it’s what keeps water out of the flue. A cap fitted to the actual opening stops rain and snow from entering, and on a restored lining it’s the difference between a surface that lasts and one that cracks in the first hard freeze. We fit caps alongside cleaning and lining work so the job is closed properly.
There’s no single figure, because the work ranges from joint repair on a sound flue to full relining on a deteriorated one. The estimate is free and the written estimate sets the final price. Call (855) 342-5978 for an exact quote – estimates are free.
Service Areas Near Midwood
We serve Midwood and the surrounding neighborhoods, including Gravesend, Bensonhurst, Sheepshead Bay, Brighton Beach and Coney Island. If you’re nearby and unsure whether we cover your block, call and ask. For more on our HeatShield work in Flatlands and Kensington, or our service across Midwood, see those pages. Learn more about HeatShield liner resurfacing and how we decide what a flue can take.
Book Your HeatShield Service in Midwood Today
If your Midwood chimney serves a boiler rather than a fireplace, it still needs someone who knows what to look for. We’ll run a camera, show you the footage, and tell you honestly whether resurfacing, relining, crown repair or nothing at all is the right call. Call Chimney Sweep Gravesend at (855) 342-5978 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Gravesend.