Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cleaning Cost in Bensonhurst?
A standard chimney sweep in Bensonhurst typically costs $150 to $280, and most homes here land somewhere in the middle of that range. That price covers a full sweep of an open fireplace flue. If your chimney has a wood-burning stove insert, a liner that needs attention, or a heavy creosote load, expect $250 to $450 or more. The written estimate you get before any work starts is what sets your final price, not the range on any website.
Key Takeaways
- A basic sweep in Bensonhurst runs $150 to $280 for most fireplaces.
- Wood stoves and insert flues cost $200 to $380 because the flue is smaller and the work is slower.
- Adding a Level 2 inspection brings the total to $280 to $520 depending on access.
- Heavy creosote, a stuck damper, or a damaged cap raises the bill because extra work gets done.
- Estimates are free, so the number you’re quoted is the number that matters.
Chimney Cleaning Cost Breakdown (2026)
Here’s how the line items break down for a Bensonhurst chimney job this year. These are typical estimated ranges for the neighborhood, and every job gets priced on its own after we see the flue.
| Line Item | Typical Estimated Range |
|---|---|
| Standard sweep, open fireplace flue | $150 – $280 |
| Sweep with wood stove or insert | $200 – $380 |
| Level 1 inspection (visual, with the sweep) | Included or $50 – $100 |
| Level 2 inspection (camera, accessible attic/roof) | $150 – $350 |
| Heavy creosote removal (Stage 3) | $300 – $600 |
| Chimney cap installation | $150 – $400 |
| Crown repair or rebuild | $250 – $900 |
| Liner resurfacing with HeatShield | $1,200 – $3,500 |
What pushes a quote toward the top of these ranges is almost always discovered work, not the sweep itself. A damper that won’t open, a flue that’s had birds or squirrels in it, or a masonry crown that’s crumbling all add labor. The opposite is true too: a fireplace that’s swept regularly and has a clean cap stays near the bottom of the range. We write the estimate after we’ve looked, and we explain what we found, so nothing shows up as a surprise on the final bill.
What Affects Chimney Cleaning Pricing in Bensonhurst
- What you’re burning. Bensonhurst has a lot of homes with a real fireplace in use, but plenty of them also have a wood-burning insert or stove tied into the flue. Inserts need a smaller brush and more careful handling, which adds time and cost.
- Level of creosote. A flue swept every year is quick work. A flue that’s gone a few seasons without a sweep can carry thick, glazed creosote that takes longer to remove and may call for a chemical treatment before it’s safe.
- Flue access and roof type. Most Bensonhurst homes sit close together with attached or semi-attached rooflines, and working from a tight side yard or a flat roof section changes how long the job takes.
- Chimney height and liner type. A tall flue or a flex liner adds time. We work with DuraFlex and Olympia Chimney liners regularly, and we can tell you whether yours is intact before we start.
- Whether the chimney needs repair. If your sweep turns up a cracked crown, a loose cap, or damaged mortar, we price that as separate work. A specialist who also does repair can quote it in the same visit instead of sending you to a second contractor.
- Number of flues. A house with one flue and a house with two flues serving a fireplace and a boiler aren’t the same job. Each flue gets swept and checked on its own.
How to Save on Chimney Cleaning
The most reliable way to keep the cost down is to sweep before the creosote builds up, not after. A flue that’s checked every season stays in the $150 to $280 range because it never reaches the point where it needs heavy removal.
- Sweep before the heating season starts, not during a cold snap. A flue cleaned before your first fire of the year means you’re not paying for a rush once the cold sets in.
- Get a chimney cap if you don’t have one. Caps keep rain, birds, and squirrels out. A capped flue is a cleaner flue, and it saves you the cost of clearing an obstruction later.
- Bundle the inspection with the sweep. A Level 2 inspection costs less as part of the same visit than as a separate trip.
- Ask for the estimate in writing before work starts. Free estimates mean you can compare the quote to what the flue actually needs.
- Fix small damage before it grows. A crown crack priced at $250 to $900 is far less than rebuilding a chimney that’s been letting water in for years.
If you want the number for your own chimney, call (855) 342-5978. Estimates are free, and the technician will tell you what the flue needs before anything gets priced.
Why Chimney Cleaning Prices Vary So Much Between Companies
Two quotes for the same Bensonhurst chimney can differ by a hundred dollars or more, and it’s worth understanding why. A sweep-only operation typically arrives with a brush, does the visual check, and leaves. That’s a real price, but it doesn’t include repair work, and it doesn’t cover what happens if the inspection turns up a cracked flue tile or a failing liner.
We do both. A sweep with us includes an inspection informed by hands-on repair experience, and we stock and install the professional-grade brands we name: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. That matters when a cleaning visit reveals something that needs fixing. You’re getting a repair quote from the same company that swept the flue, not a referral to a general contractor who’s never touched a liner.
We also do cap and crown work as part of the same visit. Weatherproofing a chimney is often the most cost-effective part of the job, and it’s frequently skipped by sweep-only services. A capped, crowned chimney stays dry, and dry masonry lasts. Chimney Sweep Gravesend handles the full scope: sweep, inspect, cap, crown, repair, and fireplace work.
What’s Included in a Standard Chimney Cleaning
A standard sweep includes brushing the flue from the top or bottom, removing soot and creosote, cleaning the firebox and smoke chamber, and a visual check of the chimney interior and exterior. Most jobs also include a Level 1 inspection, which is the basic visual assessment that comes with a cleaning.
What isn’t included in a basic sweep is anything that requires repair. A Level 2 inspection, which uses a camera and looks at accessible portions of the chimney in attics and on the roof, gets quoted separately. Liner resurfacing, crown repair, cap installation, and any masonry work are also priced separately. We tell you what’s included before the work starts so you’re never surprised by the bill.
When Your Chimney Needs More Than a Cleaning
A sweep is maintenance, not a repair. Some signs tell you the chimney needs more than a brush:
- You see cracked or missing mortar between the bricks on the outside.
- The crown at the top is crumbling or has visible cracks.
- There’s no cap on the flue and it’s been open to the weather.
- You smell smoke in the house when the fireplace is lit, or the draft is weak.
- The firebox lining has cracks or gaps.
Any of these is worth having looked at before your next fire. Small repairs caught early are far cheaper than a rebuild. If the liner itself is damaged, we use HeatShield, the ceramic resurfacing system that restores a clay flue from the inside. It’s a repair-grade solution, not a patch, and it’s not something a general handyman carries. That’s the difference between a specialist and a sweep-only service.
How Often Should You Get Your Chimney Cleaned in Bensonhurst?
Once a year for a fireplace in regular use, and more often if you burn a lot of soft wood or the flue has a history of heavy creosote. For a wood-burning stove, annual cleaning is the minimum. If you only light the fireplace a few times a season, you can stretch to every two years, but a yearly inspection is still worth it.
Bensonhurst homes tend to be older, and older chimneys have quirks: unlined flues, original mortar, and crowns that have taken decades of weather. A yearly check catches problems while they’re still cheap to fix. We’d rather find a hairline crack in a crown in October than a water-damaged smoke chamber in January.
Frequently Asked Questions About Chimney Cleaning Cost
How much does a chimney sweep cost in Bensonhurst?
A standard chimney sweep in Bensonhurst typically costs $150 to $280. Wood stove and insert flues run $200 to $380. Call (855) 342-5978 for a free estimate on your specific chimney.
Is chimney cleaning more expensive in Bensonhurst than in other parts of Brooklyn?
Bensonhurst prices sit in the same general range as the rest of Brooklyn, roughly $150 to $280 for a standard sweep. What changes the price is the chimney itself, not the neighborhood: liner type, roof access, and creosote level matter more than the zip code. A free estimate will tell you where your chimney lands.
Does chimney cleaning include an inspection?
A Level 1 visual inspection is typically included with a sweep, and a Level 2 camera inspection costs $150 to $350 extra. A Level 2 is worth it if you’ve moved into a home with an unfamiliar chimney or haven’t had it checked in years. Call (855) 342-5978 to talk through what your flue needs.
Can I get my chimney cleaned and capped in one visit?
Yes, in most cases a sweep and a cap installation can be done in the same visit, and the cap typically runs $150 to $400. Doing both together saves the cost of a second trip. Ask about it when you call for the estimate.
How much does heavy creosote removal cost?
Heavy creosote removal, sometimes called Stage 3, typically costs $300 to $600 in Bensonhurst. That’s on top of the standard sweep price because glazed creosote takes longer to remove safely. If you’ve gone several seasons without a sweep, plan for the higher figure.
Should I repair or replace a damaged chimney liner?
Resurfacing with HeatShield typically runs $1,200 to $3,500, and a full liner replacement can cost more. In many cases resurfacing is the better choice for a clay flue that’s still structurally sound. We’ll walk you through both options before you decide. Call (855) 342-5978 for an honest assessment.
Booking Your Chimney Cleaning in Bensonhurst
The number to remember is $150 to $280 for a standard sweep, with the final price set by the written estimate after we’ve seen the flue. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. If a call comes in outside dispatch hours, it’s booked into the next opening, Sunday through Friday, 7am to 7pm. Estimates are free, and our technicians have up to 15 years of experience.
We’re a chimney and fireplace specialist, not a general home-services operation, and we work with the brands we name because materials matter as much as labor. Cleaning, inspection, cap, crown, liner repair, and fireplace work all come from one company. Call (855) 342-5978 for a free estimate, and we’ll give you a straight answer on what your Bensonhurst chimney needs.
Pricing reflects the Bensonhurst market as of 2026. Chimney Sweep Gravesend offers free estimates – call (855) 342-5978.
Written by the team at Chimney Sweep Gravesend.
What Our Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Yolanda Dawson"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Renee Brooks"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Daniela Martinez