Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cleaning Cost in Mill Basin?
A standard chimney cleaning in Mill Basin typically costs $175-$350, and most single-flue homes land near the middle of that range. If the sweep opens up a firebox that hasn’t been touched in years, finds heavy creosote, or uncovers a cracked flue tile along the way, the job moves toward $400-$650. The written estimate you get before any work starts is what sets your final price, and the visit itself is free to quote.
We’re a chimney-and-fireplace specialist, which shapes how we price. A sweep-only company charges you to clean and then tells you to call somebody else for the repair. We clean, inspect, and, when something’s wrong, quote the fix on the same visit. Our technicians have up to 15 years of experience, and we name the brands we install (DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, Copperfield) because materials matter as much as labor.
Key Takeaways
- Typical chimney cleaning in Mill Basin: $175-$350 for a standard single-flue sweep.
- Heavy creosote, a wood stove insert, or a second flue pushes the job to $300-$550.
- A level 2 camera inspection, often sensible alongside a cleaning, adds roughly $150-$400.
- Cleaning plus a cap and crown job usually runs $500-$1,100 combined, priced per job.
- Free estimates, upfront pricing, and same-day service are available. Call (855) 342-5978. We answer 24/7.
Chimney Cleaning Cost Breakdown (2026)
Here’s how the line items shake out for Mill Basin homes this year. Treat these as typical estimate ranges for the local market, not fixed prices. The written estimate is the number that counts.
| Service | Typical 2026 Range | What It Covers |
|---|---|---|
| Standard chimney sweep (single flue) | $175-$350 | Removing soot and creosote from the flue, smoke chamber, and firebox; a visual check of accessible parts |
| Wood stove or insert cleaning | $275-$475 | Disconnecting and reseating the stove pipe, sweeping a tighter, more awkward flue |
| Heavy creosote removal (glazed or stage 3) | $350-$650 | Extra time and tooling for hard, tar-like buildup that resists a normal brush |
| Second flue or multiple flues | +$125-$250 per flue | Each additional flue is a separate sweep |
| Level 2 camera inspection (with cleaning) | $150-$400 | Video scan of the flue interior, joints, and liner condition |
| Chimney cap installation | $200-$450 | Stainless or powder-coated cap sized to the flue, plus fitting |
| Crown repair or rebuild | $300-$900 | Sealing cracks or recasting the crown that sheds water off the top |
| Liner resurfacing with HeatShield | $1,200-$2,800 | Ceramic resurfacing of a damaged clay liner, priced per job after inspection |
What moves a cleaning up or down the range is mostly time and access. A ranch with a straight, accessible flue and one fireplace is the easy end of the spectrum. A split-level with a rear fireplace, a stove insert, and a cap that’s been painted shut is the other end. Mill Basin’s housing stock is mostly mid-century and later single-family homes, often with brick fireplaces added or updated over the years, and a lot of them have had at least one owner do something creative to the flue. That’s usually what turns a quick sweep into a longer appointment.
What Affects Chimney Cleaning Pricing in Mill Basin
Five things most often push a quote one way or the other:
- How much creosote is in there. Light soot brushes out fast. Glazed, tar-like creosote is a different job, needs stiffer tooling, and can take twice as long. It’s also the buildup that matters most for fire safety, so it’s not a place to shop on price.
- Fireplace versus wood stove. A stove insert means pulling and reseating the connector pipe, and the flue is usually narrower and hotter. Budget for the higher end if you burn in a stove rather than an open hearth.
- Roof access and cap condition. A cap that’s rusted, bent, or sealed with caulk adds time up top. If the cap needs replacing, we’d rather quote it on the same visit than have you call a second trade.
- Whether an inspection gets added. If it’s been more than a year, or the fireplace has never been looked at since you bought the house, a camera inspection is a sensible add. An inspection backed by real repair experience tells you whether the liner has years left or months.
- Liner condition. Cracked or spalling clay tiles don’t change the cleaning price, but they change what we recommend afterward. That’s where a HeatShield resurfacing quote comes from, and it’s a repair-grade solution, not a temporary patch.
- How the fireplace burns. A fireplace that smokes into the room, or one that’s been closed off for years, takes longer to diagnose than a clean-burning one. Mill Basin’s winters, with real stretches of cold and damp, mean fireplaces here get used hard in season, which shows up in the creosote.
How to Save on Chimney Cleaning
The most reliable savings come from timing and bundling, not from chasing the lowest quote.
- Book before the cold sets in. Once the first hard frost hits and everyone lights a fire, the calendar fills. Quoting in the shoulder months is generally easier and lets you plan the work rather than react to it.
- Combine cleaning with weatherproofing. Cleaning plus a cap and crown on the same visit is cheaper than two separate appointments. Caps, crowns, and liners done right the first time, with parts built for the trade, means one visit instead of two.
- Clean annually, not when you remember. A fireplace swept every year stays in the easy end of the price range. Skipping years is how you end up paying for heavy creosote removal instead.
- Ask for the estimate in writing. A written estimate locks in what’s covered and what isn’t. Ask specifically whether the price includes the smoke chamber and firebox, or just the flue.
- Get the inspection done with the sweep. A camera inspection done during the cleaning costs less than a separate trip, and it tells you what’s coming before it becomes a repair.
Call (855) 342-5978 for a free estimate. We’ll quote the cleaning and, if an inspection turns up something, quote the fix the same visit. No handoff to a second contractor. Browse chimney sweep gravesend to see how we handle the full scope.
FAQs – Chimney Cleaning Cost
How much does chimney cleaning cost in Mill Basin?
A standard chimney cleaning in Mill Basin costs $175-$350 for a single flue. Wood stove and insert cleanings run $275-$475, and heavy creosote removal pushes the job to $350-$650. Call (855) 342-5978 for an exact quote. Estimates are free.
Is it cheaper to clean or replace a chimney liner?
Cleaning is far cheaper: $175-$350 versus $1,200-$2,800 for liner resurfacing or replacement. The question is whether the liner is still sound. A cracked flue tile is a repair, not a cleaning problem, and resurfacing with HeatShield is often the middle path that avoids a full rebuild. Our technicians have up to 15 years of experience and can tell you on the spot which you need.
Can you come today?
Same-day service is often available. Call (855) 342-5978 and we’ll check the schedule. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. We’re closed Saturday.
Why does my quote differ from a neighbor’s or an online price?
Because the house differs. A single-flue ranch with light soot is $175-$350. A split-level with a stove insert, a sealed cap, and heavy creosote is $400-$650. Online prices are national averages, and Mill Basin’s housing stock and heating habits don’t match a national average. The written estimate is the real number for your chimney.
Does chimney cleaning include an inspection?
A basic visual check of accessible parts is included, but a full level 2 camera inspection adds $150-$400. If it’s been more than a year since the last inspection, or you’ve never had one, it’s worth adding. An inspection backed by real repair experience, not a checklist, tells you what’s actually going on in the flue. Call (855) 342-5978 to add one to your cleaning.
Can I just clean my own chimney?
We don’t recommend it. Chimney work involves heights and a flue you can’t see into from the ground. Even a routine sweep done wrong can leave creosote packed in a joint or damage a liner without anyone noticing. It’s a job for a trained professional, and the cost of doing it right is modest next to a chimney fire.
Full Chimney Coverage Under One Specialist
Most chimney companies stop at the sweep. We handle the whole system: cleaning, inspection, cap and crown work, chimney repair, and fireplace repair. When an inspection turns up a damaged liner, a failed crown, or a cap that needs replacing, we quote it and do the work. Single-company accountability across the full scope makes a difference when something goes wrong months later.
We work with DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. Those are names recognized in the professional chimney trade, not box-store substitutes. HeatShield liner resurfacing, in particular, is a product most sweep-only companies don’t carry or don’t have the skill set to install. That means you don’t have to call a general contractor to fix what the sweep found.
If you’re comparing quotes, ask whether the company can handle the repair as well as the cleaning. If they can’t, you may end up paying two separate visit minimums for what should have been one job.
What to Ask Before You Book a Cleaning
Whether you call us or someone else, these three questions will tell you a lot about a quote:
- Is the price fixed or an estimate? A written estimate, with what’s included spelled out, protects you from surprises at the door.
- Does the price cover the smoke chamber and firebox, or just the flue? Some quotes cover only the flue, and the chamber is billed separately.
- Can you handle a repair if you find one? If not, you’ll be shopping for a second contractor, and the second contractor’s price will be higher because they weren’t on the roof with the chimney already open.
We answer these plainly because a homeowner who understands the price is a customer we keep. Call (855) 342-5978. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. We’re closed Saturday.
Pricing reflects the Mill Basin market as of 2026. Chimney Sweep Gravesend offers free estimates – call (855) 342-5978.
Written by the team at Chimney Sweep Gravesend.
What Our Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Yolanda Dawson"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Renee Brooks"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Daniela Martinez